New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Small things.

Posts

Small things.

#1

Small things.

Ron Harper

We often take small things for granted. Today when i was putting the final touches on my new Moxon vise, I noticed the Incra gauge in my hand. Whst a wonderful little gizmo. It does lots of layout chores so very well. I would not want to have to do withiut it. What small thing makes you more productive in the shop?

Ron

Re: Small things.

#2

"V" . . .

steve mackay

That damn Veritas Saddle Square. I swear, it's in my hand thirtytwo times a day. Honest ! Until I had it I'd have called it silly. I could live without it . . . but I don't wanna !

Re: Small things.

#3

Re: Small things.

Bruce, a MN Galoot

My LV fractional calipers, not so much for measuring (although that is useful :) ) but to transfer measurements without having to read a ruler or some such.

Re: Small things.

#4

Re: Starrett 4" Double Square

William Duffield

I don't leave home without it in my shirt pocket. If it's not in my pocket, it's on the bench, or on top of whatever machine I'm working with at the time.

BTW, the center finding head works as a saddle square.

Re: Small things.

#6

Jack Guzman from Maine

box cutter

Jack Guzman from Maine

I have about a dozen of those handy razor blade holders around the shop. I have a couple really old stanley versions and other newer ones. I always fund some use for them. I never hear them mentioned here and it makes me wonder why. They are a hand tool and a quite useful one at that. Anyone else care to admit that they use a common,lowly box cutter as a tool?---Common Jack

Re: Small things.

#8

Re: I have 3 of them

Stuart Hough

I have a drawer in my chest-of-drawers where I keep all the things I might need again (well...1/100 of them). I hate to admit I have approximately 50 case cutters of various persuasions. I have the old standard silver-colored type, several made by the Listo Cutter company (the covers are gold anodized aluminum), 10 or so of the Original Safety cutter, and a whole bunch of the S3 and S4 model Safety cutters. Did I mention I'm in the Grocery business?

Re: Small things.

#9

Re: "Olfa" man

Edward in Vancouver

About three years ago I picked up 8 plastic sleeves of replacement blades for the Olfa cutter and one knife at a garage sale. Almost done the 7th box of blades....

Used for everything from marking out dovetails to teasing the paper backing off of double sided tape to sharpening pencils to cutting veneer to marking out layout lines to........

Re: Small things.

#10

A good chisel

Bob Hackett

I tend to use whatever is handy and that`s one of the reasons why I keep a high quality chisel handy. A high quality chisel can be used for cutting, paring and scraping of just about anything softer than the steel it`s made of (saw you wincing on that one) as well as marking or defining a cut line. The long Peck Stow and Wilcox (later Pexto) socket firmer chisel with the turned teak handle I`m using now has been tuned to the point where it serves as a reliable straight edge using both the back and sides so it`s both a layout and reference tool as well.

Easiest way to shock a serious hand tool user? Pick up an old laminated chisel and use it on a metal project. :D

Quickest way to make a believer out of that same person? Show them how well it`s working, the chips of metal it is removing, the surface it leaves behind and after you`ve done all that show that same craftsman the undamaged edge of that fine old chisel. Then invite them to try it for themselves, instant believer :)

Re: Small things.

#11

Re: Small things.

Patrick Gibbons

One small thing I use that's not been mentioned is a small rosewood tool handle with nine tools inside. I have one made by Bridgeport I think. While I have the Lee Valley birdcage awl, I find I prefer the one in my tool handle. The bulb of the handle is larger and fits in my hand so well. I can't remember where I picked it up, but I don't think I paid more than ten or fifteen bucks for it. I seem to forget about its other tools.

Re: Small things.

#12

Re: Small things.

James Watriss

I have a belt pouch that I put on whenever I start working, made by bucket boss. It holds:

-mechanical pencil

-marking knife

-starrett 6" combination square

-12' tape measure

-6" starret rule with 1/2" of 1/32" graduations on each end, which is great for setting router bits

-Sharpie marker

-lumber crayon.

The first four tools are my most used, and it's to the point where I reach automatically for the pouch for things without thinking.

Re: Small things.

#13

I forgot my apron

Ron Harper

Yes indeedy. First thing I do when I get in my shop is to put on my Woodcraft shop apron. It holds a bunch of layout tools including my Incra Gauge. I have to be careful not to load it up with too much stuff. I have only been back in the shop for a few months but I have memorized where everything is in the apron. Have to be careful with marking knives in a shop apron. Just sayin..

Ron

Re: Small things.

#14

Re: Starrett 4" Double Square

Brian Greene

4" Starrett combination square

Re: Small things.

#15

Re: box cutter

William Duffield

The particular box cutter/utility knife I like best is the folding Bessey model D-BKPH. It has storage for extra blades, and is built very sturdily. When I worked in woodworking retail, every employee in the place used the same model box cutter.

http://www.woodcraft.com/product/2020267/21013/bessey-lock-and-fold-utility-knife-model-dbkph.aspx

When I'm working in the shop, I have lots of sharpening stuff, but when I'm away from the shop, I rely on a DMT extra fine credit card size diamond sharpening "stone". I carry it in my wallet. Using this, I don't go through nearly as many utility knife blades. TSA never says anything about it when I fly. I figure if someone carried an extra coarse one as well, they'd be able to weaponize just about anything.

Re: Small things.

#16

Re: Pilot P500 Black

William Duffield

Extra fine Precise gel roller ball point pen. It'll mark anything except cocobolo. Thanks to Bill Tindall for doing the research on this one and posting it here several years ago. Warning, they are fragile, and they are not cheap, and often not in stock at your favorite stationery store. I special order them from Staples, by the case (12). The funniest thing about them is how few people seem to be able to figure out how to use them. They have a cap, instead of a clicker or twist head, but the cap isn't as obtrusive as the one you'd find on a BIC, for example. They have archival ink, and it doesn't soak into the wood, so it is almost as easy to sand or scrape off as pencil.

Re: Small things.

#17

Mechanical Pencils

Thomas Skaggs, Foothills of Mount Level

I have a bunch of Pentel "Twist-Erase" mechanical pencils around the shop. I think I need even more. Those critters have a way of hiding!!

T.

Re: Small things.

#18

Habilis file (Grobet)

Wiley Horne--So. Calif.

It's not that small, but the Starrett 4" double square has already been taken two or three times :) .

This file is just really handy for small things like breaking edges, deburring hardware or hacksaw cuts. Lots of stuff.....Friend in Germany once recommended it:

http://www.ottofrei.com/Habilis-Files/

Wiley

Re: Small things.

#19

Off this topic

Ron Harper

I would like to hear bout your honing method

Re: Small things.

#20

Re: Off this topic

William Duffield

I don't hone my Pilot pens. They come sharp enough right out of the box. :D

Ducking and running…I'm guessing your question is related to another post, not this one.

Re: Small things.

#21

Yes and no

Ron Harper

I realize there is no logical connection,but I saw somewhere else that you have a honing method that is. Little different. The quality of your work makes me interested in how you do it.

Ron

Re: Small things.

#22

Humble Fixpencil and sharpener

Derek Cohen (in Perth, Australia)

I have a bunch of these ..



The sharpener is a Gedess Lead Pointer.

I even have a powered version of the sharpener that is about 50 years old. It was my father's which he used in his architectural practice ..


Regards from Perth

Derek