The Search Continues for a 602 knob
Kirk Fitzgerald
I have been looking for a Bedrock 602 flat side knob for months now. And no a Stanley # 2 or a LN knob will not work. Any help out there?
Knowledge You Can Build On — Est. 1998
The Search Continues for a 602 knob
Kirk Fitzgerald
I have been looking for a Bedrock 602 flat side knob for months now. And no a Stanley # 2 or a LN knob will not work. Any help out there?
Re: The Search Continues for a 602 knob *LINK*
Chuck Bjorgen
Have you tried Bob Kaune's web site? I just ordered a part from him, not as obscure as what you need but he might just have it. Or if you have turning club local to you, maybe you can get of the the members to turn what you need.
Bob Kaune's Site
Re: The Search Continues for a 602 knob
Kirk Fitzgerald
Chuck,
Thank you . I have tried Bob Kaune's site with no luck. The idea about getting one turned is good as I have a friend in the local turners club. Now getting the specifications for the knob may be a challange.
Cheers Kirk
Re: The Search Continues for a 602 knob
Kem
Pete Niederberger has lots of Stanley parts, probably the knob you need. I don't have his contact info handy, but will look for it, he usually has something listed on ebay.
edit: search for seller pniederber on ebay, you can contact him through there. I will try to post his email if I can find it.
Re: The Search Continues for a 602 knob
Kirk Fitzagerald
Kem,
Thanks. Pete advertises in PAST "TOOL TALK" and I have his contact information. I will give it a try.
Cheers Kirk
Re: The Search Continues for a 602 knob
Chuck Bjorgen
One other possibility is Patrick Leach, keeper of "Patrick's Blood and Gore" web site. In addition to selling lots of Stanley stuff he also markets a "601" size of the Bedrock, a size Stanley never made. He may have some insights into what special requirements your 602 knob might have and may even have one. Just curious, what is different about this knob that makes it not compatible with a standard no. 2?
Re: The Search Continues for a 602 knob
joel moskowitz
I have a flat side 602 sitting in front of me. frankly the knob to me pretty much looks like every other #2 knob I have seen, although I don't have anything to compare it too. If you need measurements let me know and I am happy to take some for you.
Re: The Search Continues for a 602 knob
Kirk Fitzagerald
Chuck,
Thanks I will give Patrick's Bood & Gore a try. There are three differences:
1. The boss that is on the body casting is larger then the Stanley # 2 and the knob will not fit over it.
2. The knob is noticeably higher ( longer).
3. The base of the knob on the Stanley is a rounded radis. The base of the 602 has a flat vertical portion.
Why Stanled did this I have no clue.
Cheers Kirk
Re: The Search Continues for a 602 knob
Kirk Fitzagerald
Joel,
There are three differences between the Stanley #2 and The Bedrock 602 for the same Type (years).
1. The boss that is on the body casting is larger then the Stanley # 2 and the knob will not fit over it.
2. The knob is noticeably higher ( longer).
3. The base of the knob on the Stanley has a rounded radis. The base of the 602 has a flat vertical portion.
Why Stanled did this I have no clue.
If you could send me the measurements that a turner would need to turn a knob that would be most appreciated. Some close up pictures would be great!
My E-mail is kstevefitz@aol.com
Re: The Search Continues for a 602 knob
joel moskowitz
Kirk,
No sweat, give me a couple of days to bring home soem measuring equipment from the office and I will get it done.
joel
Re: The Search Continues for a 602 knob
Kirk Fitzagerald
Joel,
Thank you I appriciate your time and effort.
Cheers