New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Chair Ideas

Posts

Chair Ideas

#1

Chair Ideas

Patrick Gibbons

Who knows when I'll actually get around to doing this but...

Working in my home office gives me such a backache. I have one of those metal and plastic adjustable chairs on rollers that are sold at the paper borgs. The brainstorm hits me that I should build a more comfortable chair. Anybody have any ideas what that chair should look like?

Re: Chair Ideas

#2

Re: Chair Ideas *LINK*

Larry Barrett

Patrick - this is not a chair, so probably won't address your desk needs, but it might give you some ideas. A couple of years ago Pete Galbert posted a series on his blog about a stool that he calls a 'perch'. The principle idea is that the seat is canted about 10 degrees, which puts your back in a much more comfortable position. I made a couple and find them very comfortable.


Pete Galbert's perch

Re: Chair Ideas

#3

Re: Chair Ideas

david weaver

I would instead spend the money on an aeron chair. I've not seen anyone have any problems with them, but where I've worked, we've had a mix of both those and other more conventional chairs with padding and plastic moulded structure. People who have the conventional chairs pass them around all the time trying to find one they aren't uncomfortable in. Nobody has ever had a problem with the aeron chair save a few obese people who actually managed to break them crashing down into them as they sat down.

Re: Chair Ideas

#4

I sit for a living 8-12 hours per day.

Bruce, a MN Galoot

Eleven years ago, we bought Aeron chairs only for our office. Within a month, the company bought 15 more for everyone else. We have worn out one chair, but at 6'1" and mid-200, I'm the third smallest guy in my office, and someone is in that chair 24/7/365.

Re: Chair Ideas

#5

Continuous arm Windsor

Ron in Kokomo

Very comfortable and fun to build

Re: Chair Ideas

#6

Jack Guzman from Maine

I second that


Re: Chair Ideas

#7

Re: Chair Ideas

Bruce McCrory

I had lower back surgery in April. My right leg is on fire almost constantly. The only chair I can sit at longer than 15 minutes is the cheap office chair I am at now. I can piece something together at an orthopeadic furniture shop, or rework a chair. But never do one ground up.

That said, I have three cedar chairs--my design, ground up, with slight variations--in various states of completion. Comfortable, but far too massive for our deck. I am working on a fold-up design between ease-the-back breaks.

It is a lot of fun. Just use cheap wood for the first dozen, or, until you figure it all out. ;)

Re: Chair Ideas

#8

scott grandstaff

Re: Chair Ideas

scott grandstaff

MLW Kitty is an artist and website hack.

No I don't mean she is among the legions of pretenders who say they are building web pages because it sounds like an easy gig. But then they get in over their head and never deliver.

She has worked for universities and county govs as well as the weenie wagon on the corner. Actually works.

But anyway, basically she sits at a computer nearly all the time.

She was "losing" her right arm. She was perching like a bird in a ridiculously oversized chair. She's 5'2 btw.

They generally build all computer chairs for 6' guys.

So I sat her down on various horizontal surfaces until I found the best one.

I measured from the bend of her knee to her butt. Measured her arm from elbow to hand, elbow to shoulder.

Measured her whole self every way I could think of.

I then took her chair apart and redesigned it to fit exactly her.

Put it back together to fit the dimensions.

I put her mouse pad onboard so she can work completely relaxed. Nothing but her wrist moves the mouse and her elbow never leaves the rest except typing. (I build her a custom sized desk to match but that's another story)

Even after all my careful measurements, she still wanted to hoist her legs sometimes, but not all the time, so a "barber's chair" type footrest was added. She can use it or spin the base out of the way.

The chair appears quite normal, until a 6' guy sits down in it!!

It feels so weird. Like you have been bad in kindergarten, sentenced to the tiny chair 8^)

But shes happy with it for several years now.


yours Scott

PS You would think she'd spiff up my own pitiful web page?? But noooooooo

Re: Chair Ideas

#9

Re: Chair Ideas

Patrick Gibbons

I appreciate all the comments. It appears that chair making is as involved and difficult as I first supposed. It doesn't make sense to build one chair. I've been wanting to make a dining table and chairs and all these projects need to be lumped together. As usual, you all have steered me in the right direction. Looks like I've got some studying to do.

Re: Chair Ideas

#10

Re: Chair Ideas

William Duffield

In 1995, Taunton Press published a compendium of FWW Articles, Tables and Chairs, The Best of Fine Woodworking. It included an article from the Sept. 1992 issue, 96:88-91, that describes a tool (it looks, superficially, like a chair, with lots of adjustments) for measuring people to build a custom chair just to fit them.

Through Amazon, you can buy it new for $40, or used for two bits and up.

http://www.amazon.com/gp/offer-listing/1561581003/ref=dp_olp_used?ie=UTF8&condition=used

OTOH, I've sat in a Sam Maloof chair that I, and I think most other people, find very comfortable, but Sam explained that he just built all of his chairs to fit himself. Sam was definitely not the same shape as me.