Shave horse in Press. Treated Wood?
Philip Duffy
Anyone done PTW for a shave horse? I have no place to put one in my garage and same deal outside. Wonder if there are any downsides to this idea (other than the puke of doing so!!)??? Phil
Knowledge You Can Build On — Est. 1998
Shave horse in Press. Treated Wood?
Philip Duffy
Anyone done PTW for a shave horse? I have no place to put one in my garage and same deal outside. Wonder if there are any downsides to this idea (other than the puke of doing so!!)??? Phil
hardwood alternatives
Bill Tindall
For any practical purpose the heartwood of oak will last a very long time outdoors. I have 20 year old gates of oak. I have had the heartwood of just pine last for years as deer stand framing. Depending on where you live you might even find cedar or cypress.
Re: Shave horse in Press. Treated Wood?
Bill Houghton, Sebastopol, CA
Pressure treated wood often warps and twists like mad as it dries, unless held firmly in place. Given the self-adjusting nature of a shaving horse, this might not be a problem. I'd put something on it before I put my tushie on it, though; even the newer treatments aren't necessarily kind to human flesh, if you picked up a splinter.
Re: Shave horse in Press. Treated Wood?
Jack Guzman from Maine
Phillip,
Besides the obvious uglyness of it I see no reason not to use PTW. I don't know what they use for PT near you but here they use Southern Yellow pine. It is a relatively heavy,dense wood. Should work fine. Keep in mind that the chemicals in it eat hardware so use coated fasteners or wooden pins where possible. I made mine with red oak which is cheap and plentiful here in Maine. But mine won't be kept outside.---Jack
Re: Shave horse in Press. Treated Wood?
Ron in Kokomo
White oak will last a long time outside. Red Oak will not
Not my experience
Bill Tindall
All my gates are red oak and they last many years outside. I could provide a picture of one 15 years old.
Re: Not my experience
TomD
I wouldn't do it because the PT we get up here is always the nastiest, knottiest, junk they have. If you got nice wood, and it was PTd with something wholesome, and it was actually PTd deep enough that when you cut it the heck up for all the joints it was still even marginally protected, then maybe it would be worth it.
I actually started a project like that, but didn't get it done. I was going to do the bench in black spruce, and latex it because I have garden benches that are latexed with boat epoxy on the feet, and they hold up OK. I had full size pieces of red oak for the dumbhead, and probably would have oiled it. I think with maybe a tarp over the head and table, that would last a dozen years, and maybe quite a bit longer.
Another option would be to go all marine on it. Make the bench out of DF ply, and epoxy it and cover the exterior with glass, absolutely everywhere, then paint. That will last for ever. I would probably do that to the table and bench, but make the dumbhead removable oak.
Re: Not my experience
Philip Duffy
Thanks for all the great answers and ideas! I have some 6/4 oak drying outside that may get the call to arms! Phil