New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

George Bishop saw

Posts

George Bishop saw

#1

George Bishop saw

Bill Houghton, Sebastopol, CA

Last weekend, I picked up a backsaw - 24" long at the tooth line, with a hang on the handle that implies a miter box saw (90 degrees from the hand grip hits the tooth line about three inches in front of the heel of the saw).

I don't have the skill with the camera to get a picture of the very faint etch, which seems to show a four-legged creature of some kind, maybe the greyhound that Bishop used as a logo. The handle is suspiciously blocky and shiny, and there's no medallion, points that make me think it might be a replacement, or possibly an indication of a very late model saw:


I haven't been able to find much history on Bishop saws. Anyone know how I can estimate its age range?

Re: George Bishop saw

#2

Re: George Bishop saw

john sayles

The Bishop greyhound is typically depicted sitting on it's haunches. It also sports wings.

If indeed that is a Bishop, your best bet at dating it (and only roughly at that) would be to find the place of manufacture within the etch. Bishop was in Cincinnatti, OH from (1882-1889), then in Lawrenceburg, IN from 1899-1920.

My guess, though, is that if you're seeing a four-legged creature, it's probably NOT a Bishop. Could it be the Tyzack elephant?

Re: George Bishop saw

#3

Re: George Bishop saw

jossimbyr

That is one crazy-looking saw, both in the height of the handle and the way it is mounted on the tail-end of the plate. PLEASE take the handle off and get a pic. For that third bolt to actually be bolted through the plate, there would have to be a long tail coming off the back of the plate. I'm no saw guru, but I haven't seen one like that before.

Re: George Bishop saw

#4

Re: George Bishop saw

Patrick Gibbons

Bill, Have you looked at the www.wkfinetools.com site? They have a section devoted to Bishop saws with some pictures. May help.

Re: George Bishop saw

#5

Re: George Bishop saw

Patrick Gibbons

Bill, Have you looked at the www.wkfinetools.com site? They have a section devoted to Bishop saws with some pictures. May help.