New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Tapering a blind mortise

Posts

Tapering a blind mortise

#1

Jack Guzman from Maine

Tapering a blind mortise

Jack Guzman from Maine

When boring mortises into the seat of a windsor chair I drill a through hole and then taper it using a tapered reamer. However,I noticed that many old windors were made with blind mortises. Were these tapered? If so how would I accomplish this? The reamers I have taper to a point and would not work because they would bottom out before they could start cutting.---Jack

Re: Tapering a blind mortise

#2

Re: Tapering a blind mortise

Bruce, a MN Galoot

Did you make your own taper reamer, Jack? I'm watching the Buchanan videos and he has me very interested in attempting one. Time to start acquiring a set of tools, not to mention a maple tree.

Re: Tapering a blind mortise

#3

Re: Tapering a blind mortise

Warren in Lancaster, PA

I have two different Windsors from around 1810. The leg tenons do not go through and they are not tapered (or wedged). On the same chairs the back post tenons are through the seat, tapered, and wedged. I think 18th century chairmakers would have had reamers similar to yours and would not have tapered a blind hole.

Re: Tapering a blind mortise

#4

Jack Guzman from Maine

Re: Tapering a blind mortise

Jack Guzman from Maine

I bought my reamer from Elia Bizzarri. The one that Curtis Buchanan uses was also made by him. You could probably make one pretty easily from a compass saw blade.It's a very simple tool.---Jack

Re: Tapering a blind mortise

#5

Jack Guzman from Maine

Re: Tapering a blind mortise

Jack Guzman from Maine

I think you're probably right. Thanks---Jack

Re: Tapering a blind mortise

#6

Wedges??

Ron In Kokomo

Would they have wedged the tenons as they drove them home??

Ron

Re: Tapering a blind mortise

#7

Re: Tapering a blind mortise

Philip Duffy

Bruce, I made mine and the only problem was finding a suitable saw blade. The recommended ones are not made any longer. I used a similar one bought at a Big Box. Phil

Re: Tapering a blind mortise

#8

Re: Tapering a blind mortise

eliot d

How about a tapered flute pipe reamer?

Re: Tapering a blind mortise

#9

Jack Guzman from Maine

Re: Tapering a blind mortise

Jack Guzman from Maine

That is something I'm going to try.Thanks---Jack