Re: Documentation of Old Sharpening Stones?
david weaver
His implications do seem to translate into the modern world of razor users, where the sharpness and the properties of the edge still matter and are easy to notice. Ebay has made it easy to get anything if you're willing to outbid someone else, including ultra rare 10 inch german hones (not something I would buy).
That is, at least for the german thuringia region hones. A search through ebay shows how much a yellow/green graded escher brand hone will bring, they are crazy money for fairly small stones. Like $800 for a 6x2 hone. Too rich for me, but they are regarded as the best. These were hones that were $2 in about 1900 for y/g and $1 for a gray or blue escher brand hone.
Charnleys get alternating press on there, because they are often irregular, varying fineness, and like any novaculite stone, when they are broken in, they are slow. That itself isn't a big deal, but the japanese and thuringian hones are just as fine and not slow.
Genuine turkish oilstones are a bit less easy to find, they seem to be fragile and the ones I've seen look in rough shape. I wonder if their reputation for cutting anything has to do with their friability (but I don't wonder enough about it to track one down).
I've never seen anyone mention using one on a shaving forum, they are probably hard to get, as folks otherwise mention trying all manner of stuff they shouldn't be shaving off of (like soft arkansas stones, etc).
The rest of the stuff on the list, I've tried some of the slates though they don't go into quite so much detail there, but the historical context of the link warren gave makes it sound almost as if someone would buy a charnley hone and do almost all of the work on an edge with it (which would explain why the washita became so popular).
I'll check your site for the book. Thanks for the heads up.