My saw bench
Dominic in Buck's County PA
I got real tired of using this old bucket for a saw bench. And yeah, I admit the ridicule I was getting over it helped push me towards finally making a saw bench
I really liked the simplicity of the PWW saw bench. So a while back I bought a 2x10x10' SYP, stored it in my garage loft, and promptly forgot about it. Last weekend I took it down and cut it up for this saw bench.
I used a miter box to saw the legs to the 10deg angle and then used those legs to cut the angled mortises in the bench top.
I forgot to print out the actual article showing the build sequence and as a result I had to make some modifications to the design. One of which was that I used dovetail half laps on the stretchers in lieu of mortise and tenon joints.
Since she "helped" me during the build, I asked my daughter to sign our names in pencil on the underside of the benchtop. I then added the date and traced over it with a wood burning pen
Here's a shot of my daughter helping me to wipe off the wax from when I buffed out the finish (no wax on the top of the bench!)
The finished article
There are a boat load of mistakes on this. Trust me, if you were standing next to me when I was taking those photos, you'd see them! None of them impact the design. They just are executed as I would have preferred.
But for all the cosmetic flaws, it's very stable. And it's the perfect height for me to use. So as far as functionality goes, I'm putting this in the "win column"
Thanks for viewing
Dominic









