New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

The kanna works!

Posts

The kanna works!

#1

The kanna works!

eliot d

Today I finished fitting the iron to the bed and got it to peak through the mouth. Without doing anything else I thought I would give it a try, and, believe it or not, it works fairly well the way it is. Amazing! This is supposed to be a practice piece made from tulip, but I believe it will work as a real plane. I'm delighted.

I can tell those who haven't tried it yet that it's not easy to do, especially without an instructor at your side. In my case my instructors have been TomD, Dave's Weaver and Barnett, and Pam, right here on our stage! Thanks! I'll complete the plane(hopefully) soon and , again, hopefully, figure out how to post pictures.

Re: The kanna works!

#2

David Barnett

(Message Deleted by Poster)


Re: The kanna works!

#3

Re: The kanna works!

TomD

There you go, a triumph! The next one will take 1/3rd the time.

Re: The kanna works!

#4

Re: Success!

eliot d

I tried to respond through my email, but I get a message that I can't do it that way. Thanks for all your help, even if you think that you didn't. I seem to recall lots of advice--especially sharpening. No point in trying this dai thing without really sharp chisels. I've certainly learned much abut dai, kanna , sharpening, chiseling. Perhaps, one of these days, I may actually make something other than a tool to make something!( Bill Tindal, are you listening?)

Re: The kanna works!

#5

Re: The kanna works!

eliot d

Please see my post above that says,'thanks for help'