Progress on chest of drawers *LINK*
Bill Tindall
links to main message board post
Progress on chest of drawes
Knowledge You Can Build On — Est. 1998
Progress on chest of drawers *LINK*
Bill Tindall
links to main message board post
Progress on chest of drawes
additional notes
Bill Tindall
1a.The technique I used for tenons I learned at the Mack Headley shop in Winchester. It may or may not be slow, but it is reliable for yielding tight fitting M&T joints where the rail meets the stile. I could expound on several ways that don't yield reliably tight joints that I have tried and abandoned.
1. Note the unconventional whacker I use for chiseling. I am not fond of the sound of wood on wood. This mallet, gripped near its head, is perfect for me. It is the first tool I can remember buying with my own money, likely about middle school. No idea how it came to pass that after many moves I still kept track of it until I discovered hand tools and its utility for whacking chisels.
2. The outside of the rails will be under moldings so don't get excited about the crummy wood on the edges.
3. In addition to my less than perfect mortise chisels I made chisels that I am very fond of for operations like chiseling to baselines. They are ugly but effective. I chopped 4 linear feet of base line with no need to sharpen.
4. I chopped 16 mortises with the mortise chisel with no need to sharpen it. I don't believe that its robustness has anything to do with its abrasion resistance, but rather its exceptional toughness similar to the new LV steel. A tough steel does really pay off for chopping operations. Lee Valley has a winner in this regard.