New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

a slick for the "rough work" toolkit

Posts

a slick for the "rough work" toolkit

#1

bridger

a slick for the "rough work" toolkit

bridger

I live in Arizona. old tool finds here are few and far between. I've wanted, needed, lusted for a slick for a long time. decades. several of them. none to be found, at any price. made a truck spring one, not really the thing. maybe with the help of a good blacksmith, but that's a whole 'nother basket of fish to carry to market, if you get my drift. anyhow, so somewhere along the way I accreted an old chisel in ghastly condition. wouldn't have given it a second look, except that it was wide, thick and long. it had problems, in spades. the rust pits were so deep that I still don't know if there will be anything left of the crucible inlay once I lap to the bottom of the rust. some time with a heavy angle grinder got me to the 95% steel showing point on the belly of this beast. I decided to let the top stay in the condition it came out of the electrolysis bath. wabisabi or something like that. I'd guess that this was originally a socket chisel, but any vestiges of a socket are long gone, pounded to crap by uncaring cretins and corroded away by the elements. what was left was a fairly small but intact stump. after some reflecting, I decided to go with a tang and hoop connection to the handle. I welded a bit of 1/4" mild steel rod onto the stump, bashed roughly square in cross section, hopefully work hardening it enough to give a bit of stiffness in the process. found a hoop in a junk box, a cutoff from electrical conduit, I think. selected wood for the handle- a stave of osage orange collected by my now-long-deceased brother for a bow making project. it being wood, and my being the woodworker in the family, I inherited it. finally, a way to use some of it.... heh. fitted it up, letting rough and ready be the defining aesthetic. spent some time with drawknife, spokeshave, rasps, scrapers, a bit of forcing the curve with backsaws, back to the spokeshave, rasp, scraper... finally a soak down with linseed oil and drive it all home:




a round or two introducing steel to stone got an edge that made hairs flee from my forearm. I used it today for the first time in a real world application, fairing in a proud bevel in an odd corner on some rough framing. what a sweet tool.

Bridger

Re: a slick for the "rough work" toolkit

#2

Re: a slick for the "rough work" toolkit

Patrick Gibbons, Katy, TX

I've never used a slick before and thus have no way of knowing what makes a good one good. With that said, I love your slick. I think user-made tools are the best. It shows you put a lot of thought into the design.

Re: a slick for the "rough work" toolkit

#3

Re: a slick for the "rough work" toolkit

eliot d

Sorry, I'm a bit new: what's a slick?

Re: a slick for the "rough work" toolkit

#4

Re: a slick for the "rough work" toolkit

TomD

It is a large push chisel, like 2-3 inches wide. Some of them are flat backed, and others have a barely discernible radius that allow a fulcrum of sorts behind the edge. The are used to cut into lines for large timber framing tenonss, removing bark, or flattening stuff. I love them, but can't say I have found a lot of uses for them.

Re: a slick for the "rough work" toolkit

#5

Re: a slick for the "rough work" toolkit

Cecil Nickerson

Think of it as the biggest, heaviest paring chisel you can imagine. They were routinely used by shipwrights (and still are) when the big wooden boats were being built. They are used cross-grain for paring to a line by the way. Barr Quarton of chisel fame makes a couple of sizes.

Best Cecil