New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Whittling Knife

Posts

Whittling Knife

#1

Whittling Knife

Rocky rctools

While out camping most weekends I find myself holding on to poking sticks wishing i hand a decent knife to start whittling away to past the time in the early morning while everyone else is sleeping. Anyone have some good recommendations? thanks.

Re: Whittling Knife

#2

Re: Whittling Knife

Tim Caley

Are you just looking for a simple folding type knife? Or something with a straight blade?

Re: Whittling Knife

#3

Re: Whittling Knife

Bruce, a MN Galoot

This is the one I use, a Frost knife, the top one in the pic. It's laminated Swedish steel.

Re: Whittling Knife

#4

Re: Whittling Knife

Sandor in Middletown DE

I would love to have this one, http://www.amazon.com/Flexcut-Carvin-Jack-Right-Hand/dp/B000ZUBDV0

but cant afford the greenbacks, so I use the small blade on my old victorinox camper.

I would suggest that whatever you get, you find one with a short - about an inch - long blade. I also suggest one with a straight edge to the point, not curved. It will let you cut crisp details.

Like this one:

http://www.amazon.com/Flexcut-Tool-KN12-Cutting-Knife/dp/B000ZRZQ1G/ref=sr_1_10?ie=UTF8&qid=1340042710&sr=8-10&keywords=flexcut

Re: Whittling Knife

#5

Having a thing for pocket knives....

John in NM

I'd suggest one of those :D

A stockman pattern will have 3 blades with some use for whittling, there is a similar common whittler pattern that is a bit smaller and has a different overall shape, but the blades are about the same (any knife purists will likely shudder at that, but the rest of us say they look about the same :D )

Last time I bought one, there were a few good ones in the $30 range, but that was around 2005 so it may have changed by now. Personally I like German carbon steel blades, but that is largely a matter of taste and pretty subjective.

Re: Whittling Knife

#6

Jack Guzman from Maine

Re: Whittling Knife

Jack Guzman from Maine

Personally I like a shrade three bladed pocket knife. Always on hand to cut rope,clean fingernails etc and I always keep one blade sharp for whittling. Since I was in the boy scouts I don't think I've ever been without a pocket knife.---Jack

Re: Whittling Knife

#7

Re: Whittling Knife

Brian Anderson Gunsmith

I was under the impression that Whittling is done ONLY with a pocket knife!

And that those other tools are for carving. Which is a different sport.

Re: Whittling Knife

#8

Old case xx

Ron in Kokomo

Find one of these. Not a collector specimen..they are pricey. Find an old user 3 blade version. Home two of the blades very sharp indeed for whitling. Leave one not quite so sharp but fit for utility use while camping.

Ron...who has 20 pocket knives

Re: Whittling Knife

#9

Re: Old case xx

Brian Anderson Gunsmith

That sounds like your talking about the Stockman model.

It has 3 blades and they look good for whittling.

Couple on ebay right now. For less than $20.

Cannot tell what closing price would be.

Re: Whittling Knife

#10

yep

roninkokomo

They will really take a keen edge.

Re: Whittling Knife

#11

My recommendation

Patrick Gibbons

Go to www.casexx.com and look in their pattern section. They have a few whittlers in stock though pricey. A lot of stockmans priced well. I'd get the carbon steel versions. The blades will need to be honed at a lower angle foe whittling.