New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

cutting the dai smooth

Posts

cutting the dai smooth

#1

cutting the dai smooth

eliot d

I started to make a dai recently and got down to the mouth before I screwed it up. But I learned a little. My chisel surfaces were actually fairly smooth, but they certainly didn't look like the ones on my Tsuneboro plane! My question is this: did the dai maker for the Tsuneboro actually get those perfect surfaces with just chisels? It seems impossible to me! Yet there is the dai, right in my hand, and the surfaces are just perfect. I suppose you're going to tell me about long apprenticeships and years of practice. Is that really the whole story?

Re: cutting the dai smooth

#2

Re: cutting the dai smooth

david weaver

I don't know what the masters actually use, but I know we're not the masters.

As a layman, floats and shop-made scrapers (where you blunt a chisel to 90 degrees and hone it, and put a little camber on it) are your friend to remove marks in recessed areas.

I recall George Wilson, who has also finished hundreds of (or more) wooden planes, after a machine has excavated the bulk of material - anyway, I recall george saying he used chisels. How good the results are, I don't know, but I doubt george has ever made any finished good that's not really very tidy and pleasing to the eye. Certainly not anything that's inaccurately finished.

Re: cutting the dai smooth

#3

Re: cutting the dai smooth

TomD

The final blade fitting is actually easier that the initial ramping. The reason for this is because the surface of the bed is not flat, it is curved, and the chisel has access to facets. The chisel in final fittings is eventually taking very fine cuts, and they may use a scraper. LV sells a Japanese float, but I have not see one of those used by an old pro. I've only seen two pros, though.

However, a perfect ramp IS NOT NECESSARY. You will get outstanding results with 30 % bearing. Keep in mind that machine tools do not have 100% bearing, or anything near it.

By the way, a well made push chisel is an awesome tool. I didn't have one for any of my early planes, but they are great. That said, some kind of float, mine are home made, is a lot easier to use if you are making the open mouth style.

If one does the 45 degree exercise suggested, one get experience making cuts in the ramp area, without destroying good wood.