Try/mitre gauge; maker?
Bill Houghton, Sebastopol, CA
I picked up this little (6" beam) try/mitre gauge at a moving sale over the weekend. Provenance of tools at garage/moving sales is always rather vague, of course, so I have no idea how it came to the family who was selling it.

The stock is cast iron or steel, with dark hardwood inserts apparently held in place by a screw through one insert and into the other one. And the stock is held to the beam with three rivets, which go through a recessed (and roughly finished) area in the casting that appears to be intended to mimic the brass plates that were traditionally installed on all-wood-stock squares.
The beam has fractional markings along the top edge, both faces.
The width of the beam looks British, but the irregularity of the rivet placement and the rather funky retention method for the inserts leave me wondering if it's a knockoff of some sort.
It's pretty square on the inside (measuring outside angles), but needs a little filing on the outside (measuring inside angles) to come square.
Any ideas who might have made it?



