New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Sharpening plough blades

Posts

Sharpening plough blades

#1

Sharpening plough blades

Derek Cohen (in Perth, Australia)

I have a set of unused vintage plough blades that will go into the plane I am building. They came with a 20 degree primary bevel. There is no secondary bevel. They have not been honed.

Do these blades receive a 35 degree secondary bevel, which is what I suspect, or something else?

Regards from Perth

Derek

Re: Sharpening plough blades

#2

Re: Sharpening plough blades

AlanWS

Doesn't that depend on what you tend to use them on? I figure you want the smallest angle to the edge that lasts long enough to make you happy. Since you use some pretty hard and abrasive stock, I suspect you'll need a more durable edge than those of us who use better-behaved wood.

Re: Sharpening plough blades

#3

Stephen Shepherd

Re: Sharpening plough blades

Stephen Shepherd

Derek,

I have never seen an old plough blade that had anything other than one angle, no secondary bevels.

Being as you have an unused set, and that is how they came, I would just touch up the tips and put them to work.

Stephen

Re: Sharpening plough blades

#4

Re: Sharpening plough blades

Derek Cohen (in Perth, Australia)

Hi Alan and Stephen

I simply cannot imagine the edges lasting long at 20 degrees. Generally I hone plough blades at 35 degrees, however these are metal planes (Veritas Small Plough, Stanely #46 and #46, Record #043). Hence I assumed the woodie blades would also be 35 degrees. Not that it likely makes much difference, but the bed angle of the plough I am building is 50 degrees.

Here are the blades ..


Here is where I am at with the bridle plough build (roughed out - sanding and scraping to do tomorrow). The skate is next. And that is why I need to know about honing these buggers.


Regards from Perth

Derek

Re: Sharpening plough blades

#5

Stephen Shepherd

Re: Sharpening plough blades

Stephen Shepherd

Derek,

Nice Plough Plane. The other blades you are sharpening are those scrawny thin all steel modern blades on modern planes.

The set you have is a robust laminated set, thin steel veneer forge welded to wrought iron. They are hardened harder than modern all steel blades and of course they are work hardened during the forging process.

Give the blades a try at their original angle first before you grind away the old blade.

Stephen

Re: Sharpening plough blades

#7

Re: Sharpening plough blades

Tom Colligan

Derek, I hope you are doing an article, or write up, on your site showing how you made this plane.

If you hadn't planned on it, please stop and start anew, ya hear!

I've read nearly all of your write ups and appreciate the extra work it must involve. Tom

Re: Sharpening plough blades

#8

Re: Sharpening plough blades

Derek Cohen (in Perth, Australia)

Hi Tom

I wasn't planning to originally (I often, in fact, do not do so). However, having noted that there is nothing like this anywhere (except for John Whelan's book), I have been collecting photos.


Regards from Perth

Derek

Re: Sharpening plough blades

#9

I agree