New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

80mm plane blade?

Posts

80mm plane blade?

#1

80mm plane blade?

TomD

With all this talk about reasonably priced and highly satisfactory transactions for Japanese plane blades, does anyone know a source for really reasonably priced 80 mm plane blades? Needs to be decent quality, but I am sanguine about how much use I will get out of it before I tip.

Re: 80mm plane blade?

#2

Re: Tsunesaburo, and check with..

david weaver

..the person who hooked up eliot D with the yamamoto iron.

What kind of steel are you set on for the edge? Something simple like Blue #1? Or did you want something that costs a little more and/or offers a finer edge?

Stu Tierney can probably get the tsune irons in just about any size. IIRC, tsunesaburo listed prices for 80mm irons on their pages.

Re: 80mm plane blade?

#3

Re: the yamamoto place..

david weaver

..is called "suzuki tool".

their standard size list stops at 70mm from the irons I looked at.

Re: 80mm plane blade?

#4

Re: the yamamoto place..

TomD

Thanks David. Didn't find blades on either of those. What is the website that has pages and pages of blade sets only?

Re: 80mm plane blade?

#5

Re: 80mm plane blade?

Pam Niedermayer

According to Iida (page 7 of smoothing planes), Tsuenesaburo makes 90 mm and larger blades of blue steel, 2 month special order. I'd also check on ebay, among the Japanese tool sellers.

Pam

Re: 80mm plane blade?

#7

Re: the yamamoto place..

TomD

Ok, I think I found it, just didn't get back enough pages.

Re: 80mm plane blade?

#8

Re: 80mm plane blade?

TomD

Any ones you particularly like? Thanks!

Re: 80mm plane blade?

#9

Re: 80mm plane blade?

Pam Niedermayer

I haven't seriously considered any blades over 70 mm once I realized there were no available dai blanks wide enough, about 6 years ago when Tomohito-san had some monsters at very, very good prices. Sorry. You might ask Tomohito, feel free to use my name if you don't know him.

Pam

Re: 80mm plane blade?

#10

Re: 80mm plane blade? *LINK*

Pam Niedermayer

Here's a great one for you, from a really good guy with great stuff. It includes the dai, but still cheaper than a blade set would cost.

Pam


Teruhide plane

Re: 80mm plane blade?

#11

And Tsunesaburo's list

david weaver

... check with stu, I guess, but I think he's in the range of about $1 for each 100 yen of retail.

http://translate.google.com/translate?u=http%3A%2F%2Fwww.tsune36.co.jp%2F&langpair=ja%7Cen&hl=en&ie=UTF8

I don't know if that'll come through or not, but if it doesn't, it's linked on this page part of the way down.

http://www.daikudojo.org/Archive/gallery_tool_makers/

There is also a seller on ebay named blackpops who was selling tsunesaburo stuff out of philadelphia, and cheap - cheaper than I've seen it anywhere, but little of it seemed to sell on ebay, I guess, because nobody goes there looking for new japanese tools. His seller account is there and you could always contact him, but I doubt he has the access that stu has.

Re: 80mm plane blade?

#12

This goes against my nature, however... *LINK*

Schtoo

... nobody else will do it directly for me.

The top row only go to 70mm normally, but everything else is available as standard to 80mm wide.

Tsunesaburo have bare blades sitting in their stock room, so it'd be a case of calling them and getting them to send one out with the next shipment of gear from them.

Anyone who knows me should realise how distraught I feel having to post this link.

(And Ellis, this is my own internet store. If it contravenes the rules here, please delete the entire post for me or make me aware of the transgression and I'll delete it myself.)

Sorry to be so direct.

Stu.


Tsunesaburo plane listing.

Re: 80mm plane blade?

#13

Re: This goes against my nature, however...

david weaver

I forgot that they were directly sorted in the store, or I would've just linked that directly. Would've been a lot easier to link to your store than find the Tsune page itself (which took me about 10 minutes to remember).

So if ellis is taking origin into account, this is the page I would've linked too had I remembered. I'd buy new in this case, I think, I haven't seen a reasonable used 80mm iron in a long time, and right there are gobs of them not too expensive.

Re: 80mm plane blade?

#14

Re: Reasonably priced is code for cheap.


Re: 80mm plane blade?

#15

Re: Have an idea about what that would be in $?


Re: 80mm plane blade?

#16

Re: Have an idea about what that would be in $?

TomD

Got me there, it has been a long time. Not to say though that I am not considering some of the suggestions so far.

Re: 80mm plane blade?

#17

Re: Have an idea about what that would be in $? *LINK*

Pam Niedermayer

Stu's site has currency conversion built in, find the button selector on the left hand side of the pages. Also, try XE for a generally accessible conversion.

Pam


XE conversion