We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
As those that do the Monday and/or Tuesday chats know, I have been "working" on my workbench for the better part of three years. I admit it has not been a continuous effort, due in part to my lack of free time, but I digress. Yesterday I attached the short stretchers to the workbench legs with glue and clamps. Tomorrow I will drill the holes and peg the tenons. With as much surface area as the tenons have, I'm not really too worried about racking, but the pegs should help to preclude any issues, and hey, they'll look good, too. After hearing my loving wife call this project a "table" for all this time, it'll be good to finally have my WORKBENCH together. Next up is to line up the base assembly on the upside-down top, mark out for the mortices for attachment, and set up the vise. I seem to be on track to have it finished by the end of June. Wish me luck!