New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Accessory Blades for the Veritas Small Plow

Posts

Accessory Blades for the Veritas Small Plow

#1

Accessory Blades for the Veritas Small Plow

Derek Cohen (in Perth, Australia)

This is a short pictorial on setting up the Small Plow to cut T&Gs. This is a new-to-me plane, and I took a few pics as I was working out the kinks and having a little play. I hope this helps some of you.

Link: http://www.inthewoodshop.com/ToolReviews/AccessoryBladesfortheVeritasSmallPlow.html


Regards from Perth

Derek

Re: Accessory Blades for the Veritas Small Plow

#2

Re: Accessory Blades for the Veritas Small Plow

Tom Colligan

Many thanks, Derek. That's a big help.

Is it possible LV will add other blades, i.e. profile blades for beading and the like, for this plane? It seems like it could work, no? Thanks again.

Re: Accessory Blades for the Veritas Small Plow

#3

Re: Accessory Blades for the Veritas Small Plow

Derek Cohen (in Perth, Australia)

Hi Tom

I cannot speak for LV, but I have my doubts that there will many more blades for the Small Plow. There is a more advanced plough in the works, which will do everything, according the the comments that Rob Lee has made on the forums.

But here's my tip for the Small Plow and profiled blades. I would not want to try and grind A2 steel in case the temper is affected. However, I have used Stanley #45 beading blades in it. They are too long for the adjuster, but remove the adjuster, fit them , and they work just fine. Alternately, make your own out of O1 steel or cut down old #45 blades.

Regards fro Perth

Derek