New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

OT - energy efficiency, 1950s style

Posts

OT - energy efficiency, 1950s style

#1

OT - energy efficiency, 1950s style

Bill Houghton, Sebastopol, CA

That's actually an unfair title, since I've yet to see any evidence that the person who worked on our house after World War II was a real carpenter; indeed, all the evidence has been that s/he had once seen a picture of a hammer before beginning work on the house. S/he did scrounge really, really well; we keep finding recycled this and that used in the construction work. But follow good building practices s/he did not.

We're now taking apart a room paneled entirely in knotty pine, except for some large (and air-leaky) windows, as part of an extensive reworking. The photo below is of a corner in the room, near the ceiling. The white spots in the very corner, at the top of the photo, are light shining through from the open space behind that corner. It would be a solid line of white, were it not for the cobwebs otherwise filling the space.

No wonder it was so hard to heat that room; I've found several of these gaps as I go around the room taking down the wood.


Re: OT - energy efficiency, 1950s style

#2

That's old timey A/C

John in NM

Works best in the winter of course :D

Re: OT - energy efficiency, 1950s style

#3

Yes, well...

Bill Houghton, Sebastopol, CA

...it's of a piece with the "forced air" heating system we found in the house when we moved in, which turned out (when I finally took it out) to have NO sealant between the heater and the plenum, and just two screws holding the plenum on - so that the heater was heating the closet in which it sat about as much as it was heating* the house.

*I use that term in the broadest possible sense.

Re: OT - energy efficiency, 1950s style

#4

Re: OT - energy efficiency, 1950s style

Bruce, a MN Galoot

Stuff like this makes me wonder what was holding that house together from the start! Was that corner of the house mitered together?

It also confirms again how glad I am to hear "they don't build 'em like that anymore." Be thankful for that.

You'll at least have the peace of mind knowing that it'll be done right when you're finished.

Re: OT - energy efficiency, 1950s style

#5

Re: OT - energy efficiency, 1950s style

Bill White

Yep! Plus or minus 1/2" was the norm (not that one) in some construction then. Insulation was an unknown factor as well.

Bill

Re: OT - energy efficiency, 1950s style

#6

As I move along...

Bill Houghton, Sebastopol, CA

...I have yet to find a corner in the room in which the standard in my photo above was not met. I don't know why we ever bothered to put wood in the fireplace or the woodstove that we put in later, with that much air leakage.

Re: OT - energy efficiency, 1950s style

#7

Re: As I move along...

Guillaume Dery

Would have been better putting the wood in those corners as blocking :)