New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Dialue 3000

Posts

Dialue 3000

#1

Dialue 3000

eliot d

I believe Dave Barnett will be interested. I contacted Pace Technologies in Tuscon, AZ to ask about his stuff. The loveliest lady, Laurie, talked with me and is sending me a free sample to see if I like the product. I told her that to tell the truth I couldn't possibly tell whether or not the stuff works because I'm just going to use a drop or two to sharpen a chisel on some diamond film and that , apparently, one can use olive oil, camallia oil, some other oils; but she 's sending the sample anyway and wants to hear back from me. I thought others would want to know about this pleasant experience. A 32 oz bottle costs $18; I'll get that next time. Now I'm ready to try out the four sheet combo pack of diamond films from LV to see how I like them.

Re: Dialue 3000

#2

David Barnett

You are nothing if not motivated, Eliot

David Barnett

Pace Technologies is very accommodating (as you've found) and carries a great line of cool consumables; films, mono and poly diamond suspensions, and RT resins. Dialube 3000 may be overkill for hand tool blades but a quart is cheap enough and should last for years, and as snake oil goes, well... I suppose you could oil your snake with it.

Re: Dialue 3000

#3

Re: You are nothing if not motivated, Eliot

eliot d

Yeah, I'm motivated. It's fun! By the way, Laurie asked if I wanted to talk to their technology expert, so I said sure, and he called me later. We chatted a bit. He suggested - not Dialube but Polylube. So they're sending small samples of each. Also, as I've heard here, he didn't like the idea the the LV films had any kind of backing-- sticky or otherwise. The cushion thing. Pace also sells these films -- without any backing. Thanks for your encouragement.

Re: Dialue 3000

#4

Re: You are nothing if not motivated, Eliot

david weaver

They have alumina all the way down to .05 microns!!

Re: Dialue 3000

#5

David Barnett

Hadn't even thought about Polylube

David Barnett

Polylube H9's good stuff, too, and now that I think about it, is probably more suited to steel swarfs as it gets used on magnetic heads and so on. I guess I think of it more as a cleaner than a lube, but that's likely a plus for sharpening. Good call from the tech rep. As you know, I agree with him on the non-backed films. It really can help buying from primary sources with good reps who know their products.

"Yeah, I'm motivated. It's fun!"

You think scraping, lapping, sharpening and polishing steel is fun, you ought to try faceting sapphire, toumaline and so on. It was my onetime affair with sharpening that led to my present proclivities.

Re: Dialue 3000

#6

David Barnett

They've got all the toys, David

David Barnett

Their diamond blades are kind of high end for my price tolerance, though. I buy larger diameter .006"-thick blades for a tenth the price, but the semiconductor industry apps are far more demanding than mine and I'll wager their blades last a lot longer and are less flexy, too. I've also used their room-temp resins. Lots of neat stuff.

Re: Dialue 3000

#7

And that's good; squeaky snakes are irritating


Re: Dialue 3000

#8

David Barnett

Only Prof. Eustace McGargle's snake oil will do

David Barnett

PROFESSOR EUSTACE MCGARGLE

And if we should ever separate, my little plum, I want to give you one little piece of fatherly advice.

POPPY

Yes Pop.

PROFESSOR EUSTACE MCGARGLE

Never give a sucker an even break.

Re: Dialue 3000

#9

Re: Hadn't even thought about Polylube

John in NM

I love polishing tourmaline, hardly any trouble at all compared to quartz :D

That always struck me as ironic :D


Re: Dialue 3000

#10

David Barnett

So true. Nice indicolite.

David Barnett

It's been far too long since I've found a nice parcel of tourmaline rough, but in this market, I'm not really looking. Occasionally, I'll pull up something I've been saving for far too long and cut it just for fun, design something around it and give it away.

Re: Dialue 3000

#11

Re: Hadn't even thought about Polylube

eliot d

You know, if I tell my wife or one of her girlfriends that I can spend hours in my shop sharpening chisels, they feel sorry for me. But I bet if I said I was making jewelry, well then, that would be a different story!

Re: Dialue 3000

#12

Re: You are nothing if not motivated, Eliot

Bill White

David, don't you dare bring Uncle Eustace into this discussion. (Jokin'.)

Bill

Re: Dialue 3000

#13

Re: You are nothing if not motivated, Eliot

eliot d

Who's he?

Re: Dialue 3000

#14

Re: I had to look that up..

david weaver

.. to even know what the Eustace was about. The Eustace diamond(s?). Learn something new every day.

Re: Dialue 3000

#15

David Barnett

Prof. Eustace McGargle was a snake oil salesman...

David Barnett

...played by W.C. Fields in Poppy. Someone referred to Dialube 3000 as snake oil, hence...

PROFESSOR EUSTACE MCGARGLE

And if we should ever separate, my little plum, I want to give you one little piece of fatherly advice.

POPPY

Yes Pop.

PROFESSOR EUSTACE MCGARGLE

Never give a sucker an even break.

Re: Dialue 3000

#16

David Barnett

Prof. Eustace McGargle was a snake oil salesman...

David Barnett

...played by W.C. Fields in Poppy. I wasn't the one who brought up snake oil here, however.

PROFESSOR EUSTACE MCGARGLE

And if we should ever separate, my little plum, I want to give you one little piece of fatherly advice.

POPPY

Yes Pop.

PROFESSOR EUSTACE MCGARGLE

Never give a sucker an even break.

Re: Dialue 3000

#17

Re: Prof. Eustace McGargle was a snake oil salesma

david weaver

Ahh...I'd claim I was too young to have gotten that, but the truth leans more toward the fact that I just don't read much of anything.

Re: Dialue 3000

#18

David Barnett

I suppose it was somewhat obscure

David Barnett

But I wasn't around in 1936, ya know. I'm not that old.

Re: Dialue 3000

#19

Free association.  No charge.