We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
I have a wood turning tool that's made of some kind of white ceramic material. (It's a small circular disk sharpened like a pizza cutter.) It's used on a curved bar in a scraping mode to smooth the inside of hollow forms. I believe it works better than similar HSS ones I have. What's the story on using ceramic for, say, a chisel?
"What's the story on using ceramic for, say, a chisel?"
Shock.
ZrO2, even with the addition of yttrium oxide, is still extemely vulnerable to chipping and shattering when used in thin geometries such as knife blades. They won't survive chopping bones for long and shouldn't be used on frozen foods, for example. Thinner sections crumble more easily than thicker.
The second reason, although it can be done, maintaining sharpeness is non-casual due to edge chipping during the sharpening process, and the equipment is not something every shop would likely have.
The geometry of your disc cutter is likely less prone to edge attrition than knives or chisels.