New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Travel kit.

Posts

Travel kit.

#1

Travel kit.

Derek Cohen (in Perth, Australia)

This weekend I shall be demonstrating at the Perth LN Tool Event. One area will be half-blind dovetails (featuring blue tape as an aid).

I already have a travel set of chisels. These are modified Stanley 750s (ground shoulders with minimal lands, and longer handles in She-oak). These are sized from 1/8" through 1" ...


I thought the sharpening system would be of interest, hence this post. The kit consists of a 600 grit diamond stone (for removing fine chips), and then four plates with diamond lapping film in 15, 3, 0.5 and 0.1 microns (from Lee Valley).

Each plate (and film) is 6" x 3", and made from a flat section of hardwood (Jarrah for me), with a 1/8" layer of clear vinyl as the substrate (the self-adhesive film needs a flat and smooth surface). There is an extra piece of vinyl as a cover. I use Camellia oil as a lubricant.



This makes for a very compact and complete sharpening system for chisels and plane blades.

Regards from Perth

Derek

Re: Travel kit.

#2

Re: Travel kit.

TomD

Yours is compact and complete. For my first few demos, I used to carry a Stone Pond, but I cut it back to a single piece of plywood the size of two packs of playing cards with two grits of PSA paper on one side. I was really surprised how long that one covering lasted. I had it for touch-ups for years. Now diamonds...

Re: Travel kit.

#3

Re: Travel kit.

Frank D. in Montreal

Hi Derek,

THanks for the post. How do you find the camel;ia oil as a lubricant, say, compared to honing oil? Have you tried it on cast iron with diamond paste?

Re: Travel kit.

#4

Re: Travel kit.

Bruce, a MN Galoot

What is your preference for a hammer or mallet in your kit? Do you travel with a square or marking gauge?

Re: Travel kit.

#5

Re: Travel kit.

Derek Cohen (in Perth, Australia)

Hi Bruce

While I generally take along my own tools, these are essentially just back up as I will use whatever is available. This is a LN event, so I have arranged to use their thin-plate dovetail saw (that is something I am looking forward to trying out). Chris Vesper is also a presenter (actually staying with me for the weekend), and I will use one of his cutting gauges. Of course, he is also now producing a marking knife I designed, so I will use one of those. I think that it is helpful to the manufacturers and public to see the tools they can purchase in action, and get a chance to try them out as well in a real situation.

Otherwise I have a Moxon vise, which I am sure will not be otherwise available, and I will take along my own blue tape :)

Regards from Perth

Derek

Re: Travel kit.

#6

Those LN guys sure get around.

Bruce, a MN Galoot

I'm going to an LN event on Saturday in Minneapolis. They must spread themselves thin. Or, the short straws stay in the States! :D

Re: Travel kit.

#7

Re: Those LN guys sure get around.

TomD

When I used to do LV demos, I would scrape together a set of LV tools, but the guy running the demos told me not to do it, just be yourself kinda thing. I know LV wouldn't want me to go all Pitch Guys on the participants, but I didn't feel it was right to show up with a set of tools that weren't available at any cost either. Different deal than a try out day when the LV tools are the main event.