New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Wenzloff

Posts

Wenzloff

#1

Wenzloff

Guillaume Dery

Anyone else been having a hard time getting in touch with Wenzloff lately? I've tried to drop them a note inquiring about placing a custom order 3 times via their web contact form and haven't heard anything back in over a month.

Maybe technology is to blame since I find it hard to believe that they wouldn't even acknowledge receipt, even if it were only to tell me that they are too busy.

So if anyone has been in touch or has had the same issue lately, please let me know.

Cheers,

Guillaume

Re: Wenzloff

#2

Re: Wenzloff

Schtoo

They're (unfortunately) notorious for this kind of thing, but it's consistently said to be unintentional, they're just being overwhelmed continuously.

Previously, I thought it was a bit of a cop-out, but I can now sympathize somewhat.

(I run an internet based store some folks here are aware of.)

Since the start of this month, I've had a forced 1 week trip to Australia, and coming back to Japan got a nasty dose of the flu. In that first week, things were quiet. At the end of that first week, things went double nuts crazy and now, nearly 4 weeks after my world did a loop, I'm only just now starting to get back on top of things.

I'm still behind with some things, I'm not sending out anywhere near as much email as I would normally and I'm only acknowledging emails that I can answer quickly and get them 'done with'. The bigger stuff, not much yet.

If I had not been knocked flat on my back with 'a cold', I'd probably not be so far behind. But having a light week of backlog, then an extra heavy week dumped on top of that and another 'normal' week, all while still not at 100% operating capacity and trying to do the extra work as well.

It's tough. No other way to put it, it's tough.

For me, I've decided that until I'm back on top of things properly, the little niceties can be put aside so long as I get stuff out as fast as I can, answer what emails I need to as fast as I can and actually get back to the rest as time allows is the best plan of attack.

I figure by mid-week I'll be on top of it, but I'd much rather never have had the interruption.

In Mike Wenzloff's case, I believe it was a longer, more drawn out case of 'diminished capacity' and the associated backlog that naturally brings when business is doing even moderately well. Other folks can give more details, but speaking only for myself if I were much further behind than I was and I knew I wasn't going to be able to clear things up in the time I am right now, I'd be switching things off.

It's maddening enough that I can't do the job the way I like to do it right now, but it can't be helped and thankfully, I don't think it'll be something I need to do regularly. At least, I hope not.

That's not excusing the lack of contact you're getting at all, just my take on it. Like I mentioned, before this month I had little sympathy but now, I can understand.

(Turning the lights off on interweb based stored is nearly suicide. Once folks realize "it's closed", they tend to not come back. A site that's off line is ok, down for maintenance is ok, temporarily offline for an emergency or natural disaster is fine. Lights off, they're gone and folks will look elsewhere. A brick an mortar store doesn't have that problem, since folks do need to go home and go to bed and most people understand this. Not on the internet though.)

Good luck,

Stu.

Re: Wenzloff

#3

Re: Wenzloff

Pam Niedermayer

OK, I didn't really expect you to answer my email this month, or next. Good thing I was in no hurry. :)

Pam

Re: Wenzloff

#4

Re: Wenzloff

david weaver

I think they probably are really that busy.

I would call.

I've gotten saw parts in the last month, so they're there, but I think (and I'm not professing to be the expert on wenzloff, i just order parts from mike when I want to make a saw), that life has throw mike some very large curve balls in the last couple of years, and the only way for him to have gotten caught up would be to double his prices to squelch orders.

Since the beginning of his venture, he's the only guy I can think of who said that his goal was to figure out how to make good saws faster so that the price stays the same or drops.

There was, if I recall, a period of time where he had a note on his website that said that they were no longer taking custom orders, so that may be the case, and it may be that he's not responding because of that.

Re: Wenzloff

#5

Re: Wenzloff

Schtoo

Pam,

I know, I know.

I'm working as fast as I can, but stuff keeps rolling on in. That's nice, but each time I get to work on getting rid of the backlog, it's replaced immediately, with interest.

It's so bad for some things that I'm shifting stuff as fast as they can make it. Actually faster, which means that I've got backorders from the folks making the stuff.

To put it into some perspective;

I've got orders to process. I'm smashing into the time limit too often, which is annoying but unavoidable.

I've got to add a few hundred chisels and planes. I have to info I need to do that, but need the time to sort it all out. Some really nice stuff, just no time to get it done right now.

I've got send of contact letters and emails to at least 10 different folks. Again, no time to get it done right now.

I've been asked to make up a display for a small event in July. Basically dragging every Western plane I have, and my small bench, to the Miki Kezuroukai.

(Invited to do so by Tsunesaburo no less)

I've got video to edit, but don't have the gear to do it properly just yet.

I've got video to shoot, but don't have the time to do that either.

I've got a regular day job (kind of) as well.

It just never ends.

The good point is that if it keeps up, I'll be able to 'go pro' in the very near future, which means I'll actually have the time to get it all done. I'll have help in April as well, which is most valuable.

The problem for me is that things are going so quickly that I feel like I'm failing in what I set out to do in the first place. There are things I've been asked to do, and I still plan to do them, but it's very much a case of putting things into perspective and making hard decisions as to where to direct the attention. Most often, I default to looking after the 'bird in the hand' first, the 'bird in the bush' takes a back seat.

Back to it.

(And I have to wash the dishes tonight, after cooking dinner. Nice to have a belly full of excellent fettuccine carbonara, done properly. But to wash the dishes as well?)

Stu.

(Who's belly aching for no other reason than I have an audience. :) )

(Dave, incoming. And I've got something else rather nice lined up.)

Re: Wenzloff

#6

Re: Wenzloff

Pam Niedermayer

Hmmm, doesn't sound like you've got time for all this complaining about a lack of time. :)

Pam, who cofounded and ran a software development firm for 20+ years and knows what you're going through, be brave

Re: Wenzloff

#7

Re: Wenzloff

david weaver

>Dave, incoming. And I've got something else rather nice lined up.<

Ack!

Here last week I got a small envelope, and my wife said "it's probably only big enough for a plane blade", and I thought "that got here a little too fast, but finally, if that's all that's in it, the contest is over!"

And it turned out to be a DVD.

Poo...I've gotta come up with something. Trouble is, my big fascination is sharpening stones and i kind of like to play with japanese planes.... exactly how am I going to send you something that would be unique to you?. My favorite toys are unique over here, but common over there.

Need more razors to use as test beds? I've got a few nicer ones now, no big rust scars (and respectable scales, too), and I need to thin the herd. Wife's orders (which I follow selectively at best).

Re: Wenzloff

#8

Re: Wenzloff

TomD

Schtoo, what's the biz, are you a sponsor?

Re: Wenzloff

#10

Re: Wenzloff

Joha

Did you hear anyhing from Mike ? I have been trying go get him on the phone for some time now wihe no luck. I hope is ok and not ill or something.

Re: Wenzloff

#11

Re: Wenzloff

david weaver

Nope, never heard from him. I made the order for parts through the internet store and got them about maybe two weeks later? Maybe it was less than that, I can't remember.

I have gotten intermittent contact from mike before when I ordered parts and they didn't ship for a while. But as far as full service for parts including folded backs and traditional split nuts (no star washers or some such thing), he's the only game in town for one-stop shopping, so if it takes 2 weeks or 6 months, I'm ordering from him regardless.

Re: Wenzloff

#12

Re: Wenzloff

Guillaume Dery

I haven't heard boo so obviously couldn't place the custom order. Oh well, maybe I'll be lucky and find myself a minty D12 at Tools of the Trade at the end of the month.

I hope all is well over there too. I assume that they are just slammed. Plus he does mention technical difficulties on his website so that may be part of the issue

Hope to hear from him though as the saws really are an astounding product at a very fair price (have you shopped a Medallion lately? OUCH!)