New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

plane planes itself?

Posts

plane planes itself?

#1

plane planes itself?

eliotandmax

I actually remember reading that a requirement in some Japanese woodworking apprenticeship was to fashion a hand plane so well that it would take a shaving by just being allowed to slide downwards under its own weight. Ever hear anything like that? Can you do it? Seems incredible! But after handing out around here for a while, nothing would surprise me any more.

Re: plane planes itself?

#2

Re: plane planes itself?

TomD

Just based on my experience I can`t see that with a normal weight plane. Heavy shavings take a fair amount of pressure to release, and light ones need a little downpressure on the plane since they are tens away from lifting out of the cut.. Sounds like a myth more than a reality, or a newbie hazing ritual.

Re: plane planes itself?

#3

Re: plane planes itself?

TomD

Also, while it isn`t easy to be a great plane maker, it is pretty easy to make a great performing plane, the second one I made in Japanese style, which was I think my third plane, took the finest shavings I have ever cared to make, and it used a cheap blade and an American white oak dai. At that point there really wasn`t any plane building info, and certainly no video around, and the plane had some serious flaws.

Re: plane planes itself?

#4

craigd

Re: plane planes itself? *LINK*

craigd

Maybe on a planet with higher gravity. That said, it would seem that the blade can pull itself into the wood as this video might be demonstrating:


Benchcrafted plane on a string

Re: plane planes itself?

#5

Re: plane planes itself?

eliotandmax

That's just about as impressive! Amazing!

Re: plane planes itself?

#6

I'm going to have to try that. Very cool.


Re: plane planes itself?

#7

Bob

Re: plane planes itself?

bob

I dont get a shaving that good with my hands on the plane! I should start using a string.