Re: Gifted? Long Response
Clementine
This is from my course in Art and Biblical Archeology:
Artwork was allowed by God in Israel’s worship practices, not as representations of God but in craftsmanship and ornamentation. Exodus 25-28 details the materials and construction plans for the tabernacle. The tabernacle was richly and colorfully adorned, including bright cloth, beautiful wood, gold, and other precious metals and stones. The wood used in the frame and in the items within the ark was acacia (KJV shittim), an orange-brown wood that was abundant in several places along the wilderness route of Israel. It was a hard wood and excellent for cabinetmaking. The Ark of the Covenant was made of acacia covered in gold. The Table of Showbread was made of this wood also. The altar was acacia covered in bronze. These items thus held a specific functional purpose that included a presentation in a beautiful work of art. The lampstand and its utensils were made of pure gold. The curtains were made of “fine twisted linen and blue and purple and scarlet material.” Angelic figures called “cherubim” were added that were to be “the work of a skillful workman” (Exo. 26:1). Even the doorway to the tabernacle was a work of artful craftsmanship composed of these same materials.
The same pattern of artful craftsmanship was exhibited in the temple in Jerusalem. First Kings 6 and 7 detail the construction of the temple and other buildings. The temple was not as large as other buildings in Jerusalem, and certainly not as large as other temples in the ancient world, but it was richly crafted and adorned. The windows were narrow and designed to allow light to enter the temple (6:4). The NAU calls them “artistic frames;” the NIV uses an architectural term called a “clerestory.” This is a narrow window that extends slightly above the roof line to admit light. Access to the upper stories was by a winding stair case (6:8). The stone walls were then covered with beams and planks of cedar (6:9). Cedar is a soft wood and splinters easily, so it is not a good choice for most constructions. It is, however, a beautiful wood when sawn and planed, with pronounced figures and grain that makes a wonderfully artistic impression. Since the cedar for the temple would be “old growth,” it would have straight grain and few knots, thus, an excellent choice to enhance the beauty of God’s house. If it were finished with an oil such as olive oil or oil from certain beans the effect would be truly inspiring. The cedar used by Israel came from Lebanon, a nation that still notes the cedar tree’s significant place in history by having a symbol of a cedar tree on its national flag, as well as maintaining numerous protected groves of the Cedars of Lebanon.
Wood carvings adorned the walls of the temple. These consisted of cherubim, palm trees, and open flowers (6:29). Considering the crude instruments the artist had to work with, it is amazing to read of the intricacy of the work that went into these carvings. One is reminded of the Reformation artist Albrecht Dṻrer who concentrated his artwork on carvings and woodcuts to portray the message of the Bible in art form. One other feature is interesting in its detail. Five-sided doorposts were made for the entrance of the temple. It is simple enough to make a four-sided post with right angles and straight lines. But to make five-sided posts is quite another level of skill, especially when one considers that the craftsman used only fairly crude hand tools to cut a precise bevel so that the five sides would be equal. This indicates an astounding level of critical attention to detail went into the temple construction. As for the craftsmanship of the temple, it was to be matched by careful obedience to the Lord by the people (6:12-14).