New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Profiled griding wheel?

Posts

Profiled griding wheel?

#1

Profiled griding wheel?

Robert Henderson

I just watched Tod Herrli's DVD "Classic Plane Making Volume 1: Hollows & Rounds". When he is roughing out the blade for the hollow, he uses a grinder with a wheel that has a convex edge profile. I cannot find such a wheel online. do I have to dress my own wheel to the shape I need or are profiled wheels available commercially?

Re: Profiled griding wheel?

#2

Re: Profiled griding wheel?

TomD

You would dress your own wheel. though I wouldn't actually bother myself, most shapes can be ground without that there are narrow wheels for hand grinders that require less of a dedicated set-up. The diamond point profilers will quickly dress a wheel. Be careful of the cloud of particles released that will be very dangerous to your lungs.

Re: Profiled griding wheel?

#3

Re: Profiled griding wheel?

Pam Niedermayer

I haven't watched this in a while, but I think Todd builds his wheels from cereal box cardboard, so not a big deal. Not that I recommend eating cereal that comes in boxes, but the cardboard should be available elsewhere.

Pam

Re: Profiled griding wheel?

#4

Re: Profiled griding wheel?

TomD

I watched it a few weeks back, and I think I remember that, now that you mention it. As you know that would be a power strop, and would not get the initial blade grind done.

I was perusing ebay a while back and saw some serious machine shop tool that had all kinds of radial inserts. I don't recall what it was or how it worked. I am generally familiar with machine shop tools, and tool grinders in particular, but had never seen anything like this. I immediately thought of Clark and Williams, as it was the perfect tool for making molding plane blades. I may have emailed them about it, or possibly I just pictured myself doing that. :)

Actually a perfect tool is also available in the form of a horizontal belt sander with small wheel attachments.

Re: Profiled griding wheel?

#5

Jim in Burlington Ont.

Convex is safe

Jim in Burlington ON

Making wheels convex is safe and easy. Concave is mighty dangerous ground. The outside rim can and will explode as the wheel expands. Ususally the industrial supply sells wheels with a chip very cheap.

Re: Profiled griding wheel?

#6

Re: Profiled griding wheel?

Pam Niedermayer

I suspect you could remove a lot of metal with the right compound on that cardboard, but maybe not enough. I'm setting up an arbor to the left of my crappy little lathe for mounting some other grinding wheels; but it's not yet operational.

Pam

Re: Profiled griding wheel?

#7

Re: Convex is safe

Bill Houghton, Sebastopol, CA

Concave hardly seems necessary - you can grind an arc on an iron on a straight-edged wheel by eye and by body English (well, hand English); it takes a delicate touch at the end, but if I can do it, just about anybody should be able to. I suppose you could make up a jig that will swing it the necessary radius, but it could get more complicated than just doing it wrong once to practice doing it right.

Re: Profiled griding wheel?

#8

Re: Profiled griding wheel?

TomD

Good luck, but I doubt it as far as actually grinding in the shape is concerned. Should polish like nobody's business.

Re: Profiled griding wheel?

#9

Re: Profiled griding wheel?

TomD

Be careful with that wheel set-up by the way. Be sure you have some kind of guard on the wheel. I have never had one explode, but by all accounts it is a real attention getter. Most machines run at 3600 which is higher than we require for our needs, designed for burning away HSS tool bits. Another tip is to stand to the side completely. The Raffan method from his vdeo. Gets you a great view of the bevel on the wheel, and reduces the chance of getting the wheel in one's face.

Re: Profiled griding wheel?

#10

Re: Profiled griding wheel?

Pam Niedermayer

Thanks, Tom, I'll take care. Didn't plan on a wheel guar; but I do plan on a huge face guard, maybe a bullet proof kevlar vest. :)

Pam

Re: Profiled griding wheel?

#11

Re: Profiled griding wheel? *LINK*

Frank D. in Montreal

I use the face shield that LV sells; works great (doesn't fog, can put it on and tighten it with one hand). I've never had a wheel explode on me, but I've been there a few times when it's happened...scary stuff, think hand grenade.


LV full face shield

Re: Profiled griding wheel?

#12

Re: Profiled griding wheel?

JMOHNIKE

I have used a Dremel set up in the router base with various size stones to cut smaller concave profiles. As the stone wears I move the base up or down to expose a new surface on the stone. I have also used a drill press with various stones for larger profiles. Take your time and keep the metal cool. Both methods have worked for me and should work for you. Good luck.

Re: Profiled griding wheel?

#13

Thanks, Frank, it's now in my cart.


Re: Profiled griding wheel?

#14

Re: Profiled griding wheel?

Mike Holden

Profiled grinding wheels are standard procedure for press shops. There are commercial jigs that shape the wheels available, but very expensive. In a normal progressive die there might be 5 to 20 wheels made up and kept in the toolshop for touching up details as they wear. The wheels would be saved and packaged up when a die is taken out of service for the inevitable service run of parts two, three years down the road.

Creep grinding is another use of profiled grinding wheels.

Shape your wheel to the dimensions you need, using it only for the final touch up. Dont plan on grinding it for any other shape though, you will get really small diameter really quickly.

Of course, this all depends on your point of view - in a stamping house, with $100,000 dies, and Die maintenance people costing $100/hr, dedicating 20 grinding wheels to a die makes economic sense. For a home workshop, not so much.