New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Looking for parts source...

Posts

Looking for parts source...

#1

Looking for parts source...

James Watriss

I'm trying to make a plane with a brass lever cap, and I'm trying to find a source for brass thumb screws, (thumb wheels, really) using 1/4-20 thread or slightly bigger. I'm thinking something like Lie-Nielsen uses on the cap to hold down the iron in the LAJ. I've hunted through some of the usual suspects like McMaster, and no luck so far, unless I want to order 100+... which I don't.

Any suggestions?

I'm starting to think I may have to manufacture my own. I know Derek made some out of garden hose parts, but I'm still trying to find a lazy way out.

Re: Looking for parts source...

#2

Re: Looking for parts source...

Patrick Gibbons

I believe Lee Valley has some.

Re: Looking for parts source...

#3

Knurled Thumb Screws *LINK*

Steve Elliott

I’ve been looking for the same thing but haven’t found it in brass. The closest I’ve found is from Reid Supply and is available in stainless steel and mild steel with a black oxide finish. For a lever cap I like the 3/8-16 thread and a head diameter of 7/8”.

I’ve also made silicon bronze knurled thumb screws using threaded rod and ¼” flat plate. I just tapped a hole in the plate and used soft solder to hold the parts together. Knurling can be done with a file but it isn’t quick. I don’t have a metal lathe but have learned some tricks on how to make do with a drill press.


Reid Supply Knurled Thumb Screws

Re: Looking for parts source...

#4

Jack Guzman from Maine

In the new catalog

Jack Guzman from Maine

Lee Valley has something that may work for you in the flyer I just got in the mail. They are called "Veritas Brass Insert Knobs"---Jack

Re: Looking for parts source...

#5

Re: Knurled Thumb Screws

Patrick Gibbons

James, Lee Valley has both 1/4-20 and 5/16-18 that are 3/4" long. Is that not long enough?

Re: Looking for parts source...

#7

Re: Looking for parts source... *LINK*

Bruce, a MN Galoot

It seems to me that St James Bay tools makes those thingies. One was included with the lever cap when I bought a smoother kit a bunch of years ago. Don't send emails, though--call him.


St James Bay Tools

Re: Looking for parts source...

#8

Re: Looking for parts source...

TomD

I was going to say SJB also. They came with my planes.

This is not a hard part to make. I have made them up to about 3". Anyone with a metal lathe should be able to handle it. Easy is one thing, but it can take a while to get all set up. I'm in Canada, but a lot of people in the US can handle it, a few million probably.

Re: Looking for parts source...

#9

Why LV, of course ! . . .

steve mackay

Besides the cover (which is wonderfull if you read what they are made of) the new suplimental LV tool porn has knurled knobs that I'm going to be able to "in-fill" with anything I want. I'm also trying to think up a use for those new brass thumbscrews. Now THOSE are cool !