New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Is anyone NOT storing hand planes....

Posts

Is anyone NOT storing hand planes....

#1

Is anyone NOT storing hand planes....

Bill Tindall

....that is to say, using them? Lots of sharpening and storing under discussion, but we have been sparse on pictures of people making stuff. It is the season to be making stuff. Only 2 1/2 months to the spring gardening interruption. Well, maybe a bit longer elsewhere.

Re: Is anyone NOT storing hand planes....

#2

right up your alley

Larry Williams

We had a customer contact us this week about some problems with a plane. He's been using it frequently working on green wood for three years and is now having some problems with it. It turned out it's the only plane he uses and he hasn't sharpened it since he got it. Maybe we should have made him an iron of magic-bullet steel that keeps an edge forever and never rusts? There's no wasting time hoarding or sharpening going on there.

Re: Is anyone NOT storing hand planes....

#3

Re: Is anyone NOT storing hand planes....

Phil Smith

I've been working on dinning table top for son over Christmas. Top is to fit base I made a couple of years ago. Top will be about 34" X 64". Top was glued up and then hand planed with LN 4 1/2 with custom made M4 plane iron hardened to Rc 64. Reason for new top is that I made the base too big for laminated top that I had laying around when son was in graduate school. Should of used a story stick to check dimensions from plan.


Here is picture of top with solvent applied to show grain. Top has fair amount of figure hence thin shaving in first picture.


Re: Is anyone NOT storing hand planes....

#4

Re: that had to have been magic steel

Archie

Wow, three years!!! That's the kind of blade I want, one that can go three yrs between sharpening. Or, what kind of crazy sharpness do you put on those blades before sending them out the door?!

Incredible.

Re: Is anyone NOT storing hand planes....

#5

Re: Is anyone NOT storing hand planes....

Archie

Pretty, pretty! One day, when I grow up...

Re: Is anyone NOT storing hand planes....

#6

it has me curious

Larry Williams

Don had him send it back for "repair."

Re: Is anyone NOT storing hand planes....

#7

used one

Jerry Gibbs

I volunteer at a maritime museum. Had to flatten a 24" x 8" board with a twist. Boss said to prop up low spots and send it through power planer, which didn't work. Knocked off high spots with a hand plane and the planer worked fine. I was proud of myself, since I am a hand plane newbie. Jerry

Re: Is anyone NOT storing hand planes....

#8

Congratulations

Bill Houghton, Sebastopol, CA

...and, depending on the age of the ships your museum hosts, you may well have flattened that board the way the shipwrights would have done originally.

Re: Is anyone NOT storing hand planes....

#9

Pictures?

Bill Tindall

I would like to see pictures of the kind of work done in the museum shop.

Re: Is anyone NOT storing hand planes....

#10

Re: Pictures?

Jerry Gibbs

We do a little bit of everything. The museum gets donations such as a fibreglass boat which we will fix and sell. We occassionally get to build a new wooden boat. We built a replica of a spanish longboat for a local monument. We will also repair wood boats to raise cash. The theme of the museum is southwest florida commercial fishing. The museum part has more history than the boat shop. We have been in the throes of establishing a new shop. We we start the next boat I will post some pictures. Jerry

Re: Is anyone NOT storing hand planes....

#11

Re: Is anyone NOT storing hand planes....

TomD

"....that is to say, using them? Lots of sharpening and storing under discussion, but we have been sparse on pictures of people making stuff."

Storing and sharpening is using. I don't sharpen planes unless I am using them, and the storage under discussion is not like the type on Storage Wars, it is at-hand grab 'em and go storage. Don't you know?

" It is the season to be making stuff. Only 2 1/2 months to the spring gardening interruption. Well, maybe a bit longer elsewhere."

I've never been that kind of maker. Winter is slow for me, because my shop is cold. Which I wish I could overcome, but with the economics of retirement at 40 is a consideration. The other side of it is that some of my shop work is not stuff I can do indoors, or at least requires a breeze, and that is out of the question for 5 months of the year.