New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Baby's Bed

Posts

Baby's Bed

#1

scott grandstaff

Baby's Bed

scott grandstaff

sometimes a girl just needs a place to kick it......:)

just finished yesterday






yours Scott

Re: Baby's Bed

#2

May I borrow some creativity?

Bill Tindall

I am in awe at what woodworkers can come up with. This one takes the prize! Thanks for posting as it brightened a day.

Re: Baby's Bed

#3

Wow

roninkokomo

THAT is very nice Scott.

Re: Baby's Bed

#4

What a beautiful snuggly shape

Bill Houghton, Sebastopol, CA

and the "quilted" effect on the sides is a really neat reference to baby blankets.

Re: Baby's Bed

#5

You had another baby?

Bob Hackett

No wonder you haven`t been posting. Those little folks wear a body out.

Nice bed you managed to sneak off and make. I bet the new arrival loves it.

Re: Baby's Bed

#6

Re: Baby's Bed

Frank D. in Montreal

Love it!

I always click on your posts as if I'm unwrapping a treat.

How'd you do the hatching on the sides? I was also intrigued by the 2 little round thingys on the back...what are they? I assume the joinery is screws?

Thanks for posting.

Re: Baby's Bed

#7

Medieval Scandihoovian design

GolfSteve in Calgary

Looks vaguely like a Medieval-Scandihoovian influenced design. I like it.

Re: Baby's Bed

#8

Barb Siddiqui

Oh Wow

Barb Siddiqui

That's just wonderful. Great, great job in the designing and the building. Wonderful!

Re: Baby's Bed

#9

scott grandstaff

Re: Baby's Bed

scott grandstaff

Thank you for the kind words and thoughts.

I had some heart trouble, Bob. Good to be missed.

And its a grand daughter you guys! As if!! This one is a big surprise because its only grand. Great grandchildren is what I'm used to these days. 8 now.

The bed joinery encompassed dowels, screws and splines.

The quilt was carved with chisels.

Western old growth sugar pine is a delight beyond words to carve. As soon as you figure out downhill grain from uphill (heh), its like scooping warm ice cream.

The wide, deep, curved, raised panels were cut the same way. Drawknife, spokeshave and then chisel to finish.

The interior curved raised panel was cut exclusively with a sharp chisel. Sort of an odd quartering cutting angle did the trick. Like a heavily skewed plane blade sliding along, really.

The western black oak is closer to chestnut to work. It behaves a treat and actually smells good while you do it!

The little rosettes were cut with an old expanding auger that was in such poor shape I didn't feel bad about just grinding the cutter to make them. Took about 10 minutes. In use, you cut the rosette into the face of a scrap, and then rip the stock away from just behind, until the rosette falls free. Larger ones I have to lathe turn but smaller like this drilling is faster. I was going to use a spade bit for the cutter instead, but didn't have one to throw away. The old expanding bit was in bad shape, and handy.

Drawknives (3 different) and spokeshaves (6 or more) were certainly crucial. As well as a Stanley #20 adjustable sole plane. Smoothers, jacks, rabbet planes and a jointer too. Lots of kinds of saw from big to little.

Every trick in the book. Hand and power tools alike, all kinds.

The finish is shellac of course. Its for a baby, after all.

I did draw these plans before I started.

If anyone needs a copy........heh :)


yours Scott

Re: Baby's Bed

#10

Re: Baby's Bed

Bill Houghton, Sebastopol, CA

Glad to hear your heart issues are stabilized.

And it looks like you've got PLENTY of things to occupy your (non-physical) heart. Eight great-grands and a new grand? Jeez!

Re: Baby's Bed

#11

Re: Baby's Bed

GolfSteve in Calgary

Can you remove the base? After seeing your original design I thought I might like it without the base so that it can rock back and forth.

Re: Baby's Bed

#13

scott grandstaff

Re: Baby's Bed

scott grandstaff

I need to post another picture. Kitty's contribution.

This here is a bankie. Soft as butter yet tough as a cob.

Not too big, not to small.

Made for dragging through hell n gone until parents have wanted to throw it away a long long time ago,

and don't you -ever- think about it.

A bankie



yours Scott

Re: Baby's Bed

#14

Man, you are getting my envy juices flowing

Bill Houghton, Sebastopol, CA

...since my sons have yet to produce grand-kid #1.

Cute blanket.