New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Cutting board question

Posts

Cutting board question

#1

Ellis Walentine

Cutting board question

Ellis Walentine

A friend of mine wanted to know why professional chefs' cutting boards (butcher blocks) are laid up with the endgrain oriented up as the cutting surface. I thought I would let this erudite community have a whack at this one.... What think? What other design factors might be involved.

Ellis

Re: Cutting board question

#2

Re: Cutting board question

Don Orr

Two things I have heard over the years.

Wood movement is equalized in all directions-it stays together. Also dents less when pounding meat as opposed to long grain.

Slicing across end grain dulls the knife less and leaves less marks in the wood. Think of running a knife into the end of a paint brush instead of across the bristles.

Certainly no expert here-just repeating what I have heard and read.

Re: Cutting board question

#3

Moses Yoder

Re: Cutting board question

Moses Yoder

The wood cell is a canoe shape, with the end of the canoe pointed towards the end of the board. I think this makes the end of the board quite a bit harder and more resistant to damage from cutting. It certainly makes it more resistant to damage from pounding.

Re: Cutting board question

#4

Re: Cutting board question

David Weaver

Cellular orientation of the wood - makes the surface more durable by cutting between strands instead of cutting across them and severing them. I wouldn't be surprised if it was easier on the edge of the knife than side grain, too.

Tell someone who asks this question to take a stack of toothpicks and lay them out flat and cut across them, and then take a stack of toothpicks and stand them up and cut across the ends. Smaller scale on a board, same thing.

Re: Cutting board question

#5

more durable

Bill Tindall

Thought experiment: take two slices 1/16" apart on end grain. The wood micro "splits" but nothing loose remains. Now, take two similar slices cross grain. The part in between the slices is held in place more weakly than in the first case. It will eventually chip out, resulting in loss of material-wear.

That said, for ease of fabrication the blocks in my kitchen are flat grain and have held up just fine for 19 years.

One of my earliest memories is Newton's grocery store with its huge butcher block and meat case. I also recall the bananas arriving "on the stalk" in a large box. Older kids told stores of tarantulas crawling out of the bunches, a thought that terrorized a 1st grader.

Re: Cutting board question

#6

Re: Cutting board question *LINK*

Pam Niedermayer

Apparently the antibiotic properties of wood cells works very well if the food can get down in the wood; so that the performance of end grain wood boards is far superior, even to plastic boards.

Pam


Cutting board study

Re: Cutting board question

#7

beautiful bunch of ripe bananas

patrick gibbons

hide the deadly black tarantula. Your story reminds me of the song.

Re: Cutting board question

#8

Stephen Shepherd

Re: Cutting board question

Stephen Shepherd

What Pam said and end grain is easier on knife and cleaver blades and doesn't show cut or chop marks like side grain.

Stephen