New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

How was veneer made?

Posts

How was veneer made?

#1

How was veneer made?

Bill Tindall

I am veneering the drawers on this cherry chest of drawers. I like the looks of a uniform grain pattern down the drawer rank. Sawing the veneer is no problem on my large band saw and making it uniform thickness easy on the drum sander. Which led me to thinking, how did they do that in 1750, and especially so on something like a mahogany crotch that must have been worth a Kings Ransom in the day. I can imagine someone greatly more skilled and experienced than I sawing off a flitch, but then how was it smoothed for gluing? As frail as a crotch would be it certainly was not planed....I suppose?

Re: How was veneer made?

#2

Moses Yoder

Re: How was veneer made?

Moses Yoder

I didn't take the time to research it, so I am just going from memory, but I think the basic veneer knife has been around for a long time. A Google search didn't turn up any useful info. Veneers could have been made by dragging the log under the knife with a couple horses before internal combustion engines came along.

Re: How was veneer made?

#4

Re: How was veneer made? *LINK*

Dean J in MN

Sawn with a veneer saw and then smoothed with a toothing plane and card scraper is one method.

A group of us have been playing with veneer saws as shown in Roubo, and it is within the realm of possibility to saw 1/16" veneer without too much trouble. Of course, there were people whos job it was to do this back in the period, so I'm not sure how often a cabinetmaker would have been sawing his own veneers.

After they are sawn you remove the saw marks pretty quickly with a toothing plane and then remove those marks with a smoother or card scraper depending on the wood you are dealing with.

My 2cents.

-Dean


Building the Roubo saws

Re: How was veneer made?

#5

Where are you at......

Bill Tindall

I just happen to have a magnificent 32" x 31" cherry crotch you could practice your technique on..........

Considering how "well" I did slabing it into 5" thick slices with the chain saw I put out of my mind attempting to slice it into veneer with a hand saw. I am in awe of anyone that can. Not sure what I can do with it.

Re: How was veneer made?

#6

Re: How was veneer made?

Warren in Lancaster, PA

I thought I would add a few notes. Hand cut veneers are quite a bit thicker than what we see today. It isn't unusual to see 1/8 inch veneers on 18th century work. It could be that most are somewhat thicker than 1/16. For planing thin stuff like this we usually secure one end of the veneer with clamp or holdfast and then plane away from the clamp so the veneer is in tension. If you plane toward a stop the veneer will buckle. Veneer saws, Scie a refendre, are pictured in Félibien, Diderot, and Roubo.

Re: How was veneer made?

#7

Re: How was veneer made?

Frank D. in Montreal

The side to be glued didn't have to be very smooth with hide glue as an adhesive. For delicate veneer you can also remove saw marks and do smoothing after the veneer is glued onto the substrate.

Re: How was veneer made?

#9

2 HP?