New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Masseys 17 old metal front vise

Posts

Masseys 17 old metal front vise

#1

Masseys 17 old metal front vise

charlie belden

The daughter and grandaughter of violin makers has decided to sell most of her father's and his father's violin making tools and equiptment. The old workbench, with a traditional all wood tail vise, has a very unusual quick release front vise. In addition to looking unusual, the way it works is odd. Move the handle about 20 degrees CCW and the jaw releases and slides in and out easily. Roitate the handle back to vertical and the jaw locks in position. But there's no obsious means of tightening the jaws. Everythihng works smoothly and the vise can easily be operated with one hand.

Anyone know anything about this vise?






Re: Masseys 17 old metal front vise

#2

Charlie, That vise looks...

Brad Chenoweth

remarkably similar to Mike Jurnigan's shave horse!

Re: Masseys 17 old metal front vise

#3

Re: Charlie, That vise looks...

charlie belden

With smooth metal jaws - that can't be tightened?

The grandfather came to the United States around 1915, bringing his violin making tools with him. His son took up the trade in the forties and made violins probably through the early to mid 1980s. Given the age and construction of the work bench this thing is on, I suspect it was the grandfather who built it. So I'm guessing the vise is from the late 1800s or early 1900s. It's built like a tank.

The movevable jaw may have an eccentric on the locking mechanism that snugs things up after you've brough the jaws up to the work - applying just a little more force to hold the work. But the metal jaws had no evidence of ever having leather or soft wood faces.

Re: Masseys 17 old metal front vise

#4

Re: Masseys 17 old metal front vise

charlie belden

Have NO idea how those images got attached to my message.

Let's try again






Re: Masseys 17 old metal front vise

#5

Re: Masseys 17 old metal front vise

Bill Houghton, Sebastopol, CA

Vertical would be an odd location for the handle with the vise closed - it would be in your way. I do wonder if, as you suggested, there's a cam effect that would cause it to clamp tighter as you move the handle past vertical. There are some machinist's vises (think drill press or milling machine vise) that work this way.

If it's stopping at vertical, there must be something getting in the way. Without disassembly, you probably can't tell if it's just a chunk of wood or some such or a broken part. You might take that into account in agreeing upon a price.

Re: Masseys 17 old metal front vise

#6

Re: Masseys 17 old metal front vise

John in NM

Might work like my Columbian, just a simple acme screw with a slot cut along the axis. Mine slides when the handle is vertical, then about a quarter to half turn to tighten it up (depending on how recently I've tightened the bit that engages the screw).

Nice looking vice.

Re: Masseys 17 old metal front vise

#7

Re: Masseys 17 old metal front vise

charlie belden

No acme screw, or any threads at all, on this one, Smooth shaft with a handle on one end and a cam near the other end. Which is why there appears to be no means of tightening the jaws.


Re: Masseys 17 old metal front vise

#8

Leo Cuellar

Re: Masseys 17 old metal front vise

Leo Cuellar

Charlie, have you tried clamping anything in the vise to see what kind of gripping power it has? I'm guessing that maybe the cam, or the part of the groove the cam operates in, is or should be slightly tapered in order to draw the jaws together to provide the gripping power. Just a theory as, I've never seen a vise like this one before.

Re: Masseys 17 old metal front vise

#9

Re: Charlie, That vise looks...

Brad Chenoweth

Sorry, Charlie. When I opened this message originally, the pictures that showed up were the ones from Mike's post in the shave horse thread below. I even went back and checked when I posted my reply, still saw the same pictures. Now, I can see your vise. I don't have any idea what the explanation for that might be, but I'm really not crazy! At least, I don't think I am! Then again... :D

Brad Chenoweth

Re: Masseys 17 old metal front vise

#10

Re: Masseys 17 old metal front vise

Brad Chenoweth

Charlie,

Maybe this link will shed some light. It appears the vise should be released when the handle is vertical. This is similar to some machinist's vises, as Bill mentioned. I suspect the cam can be adjusted so the jaws operate properly. And, it's comforting to know that I'm not losing my marbles. ;)

P.S- I can't seem to attach the link, at least it doesn't appear in the preview. Here is is: www.worthpoint.com/.../big-masseys-patent-17-woodworker-auto-776915...

Re: Masseys 17 old metal front vise

#11

Re: Masseys 17 old metal front vise

charlie belden

This vice is a bit more complicated than it appears.

Thinking about it, I believe the eccentric "collar" on the cylindrical shaft also has a slanted face on its handle side. Its eccentricity would serve to lock the movable jaw in place. But before the movable jaw is locked in place, the slanted face of the "collar" would pull the movable jaw in some amount, controlled by the "face slant angle". With the right "face slant angle", the grip would be firm enough to hold the work, but not enough force being exerted to crush or deform it significantly. And given the vice is on a violin maker's bench, I suspect that wouldn't be very much force at all.

The handle being vertical when things are locked down is a bit confusing. Seems, as been pointed out, that it would get in the way of the "working area" since it extends up above the top of the bench when the movable jaw is locked.

I'm working on a SketchUp 3D model of this thing. Perhaps that will shed some light on how this thing is designed to work. It certainly would help to know the tasks it's used for.

Re: Masseys 17 old metal front vise

#12

Re: Masseys 17 old metal front vise

patrick gibbons

The vise has half threads on the spindle. When the lever is thrown vertical it tightens against the piece with the threads engaging and pulling the vise face against the object being held.

Re: Masseys 17 old metal front vise

#13

Re: Masseys 17 old metal front vise

patrick gibbons

years ago I found the patent for this vise. It is just a cam action.

Re: Masseys 17 old metal front vise

#14

Re: Masseys 17 old metal front vise

Steve Bigelow

I bought an old school shop class workbench with 2 of those Massey's No 17 patent vises on it this morning. I am looking forward to the rest of this thread. The vise apparently is supposed to cam into position. I will be attempting to figure it out this weekend.