New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Curiosity on minor issue: screws on plane knobs

Posts

Curiosity on minor issue: screws on plane knobs

#1

Curiosity on minor issue: screws on plane knobs

Bill Houghton, Sebastopol, CA

I picked up a nice old Stanley No. 4, missing its knob - all that remains is a lonely screw. I happen to have a parts No. 62 and a newly acquired No. 46 that looks like it's going to be a parts tool too (because I then acquired another 46 in better shape). These two use one-piece machine screws with oval heads, unlike the bench plane series (1-8 - well, I don't actually know about 1s and 2s) that all use those cylindrical slotted-end nuts on studs. Same size and thread pitch among these screws; just different head configurations that look identical when the screws are installed.

Is there some functional reason that the 62 and 46 use one-piece screws while the bench planes use studs-and-nuts? Or is this just another example of the range of creativity that Stanley seems to have allowed its designers?

If the latter, I think I can assemble knob and screw from the two parts planes and get a working No. 4 frankenplane.

Re: Curiosity on minor issue: screws on plane knobs

#2

Moses Yoder

Re: Curiosity on minor issue: screws on plane knob

Moses Yoder

I don't know your answer on the screws for sure although it would seem the larger head on the bench plane holds the knob more securely. Less tearing up of the hole from use.

If you have a #46 fence for sale, I could use one. I did buy one but found out it was a slightly different type and the holes in the fence don't quite line up with the rods on the body. So email me at 2lgaloot@gmail.com if you have a fence you want to sell.