New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Molding Planes

Posts

Molding Planes

#1

Molding Planes

Todd Nebel

I bought a few molding planes over the weekend on an impuse. Four to be exact. I paid between $10 and $12 for them. When I got home and really inspected them I had a sinking feeling I just bought some shop decorations. They are pretty old and the irons look hand forged. Today I figured what do I have to lose and sharpen one up and gave it a try.


I'm pleased with the outcome and incorporated it into my current project. The bead is not in perfect roundness (pretty close) and there's a little tearout (mainly due to the figured wood), but that just gives it a real hand worked look. Honestly I'm not sure it's even a beading plane, but that's what I wanted it to do.


Here's the moldings starting to go on the case.


It was fun using this old plane. I'll have to educate myself on molding planes, sources and prices, but I can tell you there's more in my future.

Thanks,

Todd

Re: Molding Planes

#2

Moses Yoder

Re: Molding Planes

Moses Yoder

I think a new plane like that from Clark & Williams would be $100-$120, at least the last time I looked I think they were. You paid a typical antique shop price in a small town. In a large town they might be $20.

To use a molding plane like that, I would typically start about 6" from the end, working into longer strokes with each stroke. With a pitted iron you can't make it really sharp either, which results in tearout. Taking very fine cuts with an extremely sharp iron results in less tearout. But as you said, the tearout adds to the character. I'd charge extra for it.

Re: Molding Planes

#3

Re: Molding Planes

David Weaver

You've got a plane that adds a detail that you wanted for $10-$12, you're right not much to lose.

It would be difficult to make one for that, as every step you turn, you'll have to make or find a tool to do things like trim the cheeks of the mortise, etc.

Re: Molding Planes

#4

Re: Molding Planes

David Weaver

$267 for a 1/8th bead from larry, but to be fair, the plane that you pay $267 for is a work of art.

Re: Molding Planes

#5

Re: Molding Planes

Todd Nebel

Thanks for the feedback and tip, Moses!