New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Scraping.

Posts

Scraping.

#1

Scraping.

Derek Cohen (in Perth, Australia)

The second cabinet was glued up today. While the glued dried I got on with cleaning up the exterior of the first cabinet.

Looking at the finished result, I was struck by the contrast with the, now, rough look of its original state. I think that one of the joys of woodworking comes when the finished state started to emerge, like a flower unfolding.

The second cabinet glued up minus clamps ..


I particularly love it when planing down dovetails and they sharpen in profile and detail. Here I first used a block plane straight across the grain, working one side to the centre, and then the other side to the centre.

I am very concerned about break out at the dovetails, and for this reason prefer to smooth the wood with a cabinet (card) scraper than a smoothing plane. I find there is more control with a cabinet scraper as it is possible to lift the blade just before hitting the dovetail.


The finish off a scraper is not usually as reflective as from a smoother, but I was happy with the finish here (although it is interesting how the camera lens shows up all the flaws in the surface) ...


I was also very happy with the way the dovetails came out. Hardwood to hardwood dovetailing is for masochists. There is no give and no leeway for error.


A few final shots for now.



Regards from Perth

Derek

Re: Scraping.

#2

Re: Scraping.

patrick gibbons

Derek you are such a good craftsman. I'll give you my highest praise- I'm jealous. To my mind, scrapers don't give as good a finish as planes but once a finish is applied, I've never been able to detect a difference.

Re: Scraping.

#3

Moses Yoder

Re: Funny....

Moses Yoder

You say your projects are coming along like a flower unfurling. Mine are more like a tornado hitting a barn full of hay. You must be doing something wrong.