New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Obit for an old friend

Posts

Obit for an old friend

#1

Obit for an old friend

patrick gibbons

Yesterday, Sunday July 10th, my Greenlee 1 1/2" chisel's green hardwear handle cracked. It was an octagonal-shaped handle that permenently connected to a socket and when a piece cracked off, the majority of the handle separated from the socket leaving plastic embedded inside. The Greenlee leaves behind a 1/2" paring chisel and a set of butt chisels, all with the distinctive green hardwear handle.

Early on the Greenlee had provided service to a carpenter in the Midwest. Subsequent to an ebay auction, the chisel moved south to Texas where it was employed in a number of projects, not least was making a tree fort. In a routine paring of end grain for a taboret leg a blow from a persimmon mallet resulted in the damaging crack that separated the chisel from its handle.

Services are not scheduled at this time but will occur shortly after a better knowledge of how to remove the remaining plastic and attach a new handle is known. While the chisel will be missed, a new existence in the world of Patrick's woodworking is anticipated. Suggestions may be sent to Patrick Gibbons in care of WoodCentral hand tools forum. The family wishes to thank in advance all who participate.

Re: Obit for an old friend

#2

Ellis Walentine

Condolences

Ellis Walentine

I suggest a blowtorch for the socket end of the chisel. That should take care of the remaining plastic. Now, if you happen to believe in reincarnation, you could probably manifest a whole new life for your chisel. It would be a shame to bury the remains.

Ellis

Re: Obit for an old friend

#3

Re: Obit for an old friend

John Veerkamp

Use the offending persimmon mallet to turn a new handle.

Re: Obit for an old friend

#4

Re: Obit for an old friend

Roger Nixon

I have some Greenlee plastic handles but they are not octagonal.

I've found it it easy to get the plastic out of a socket by drilling a hole though the plastic and screwing in a wood or drywall screw. As the screw bottoms out in the socket it forces the plastic out.