New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Working with CPM M4...

Posts

Working with CPM M4...

#1

Working with CPM M4...

anotherBob

Don't know if anyone here saw those wonderful looking carving knives up on WN that a German fella made:

Batman stroke again - Carving knives

http://www.forums.woodnet.net/ubbthreads/showflat.php?Cat=&Number=5474551&page=3&view=collapsed&sb=5&o=

From reading other threads here regarding M4, it looks like it'll make a nice knife edge along the lines of those in the link above. Never worked it though... thinking you can't just hacksaw it like 3V right? ...dunno. Anyway, if I can find a way of rough cutting it, I'll be able to shape it the rest of the way using a belt grinder. If it's do-able, a few short knives and also some tanged chisels would be fun.

Whatcha think?

Re: Working with CPM M4...

#2

Re: Working with CPM M4...

David Weaver

I think for carving and chisels, based on what we've seen here recently, I would go for a plainer steel that you could harden and temper at home and save the M4 for plane irons.

Re: Working with CPM M4...

#3

Carry on....

Bill Tindall

It would be great to have comparative data between M4 and 3V. M4 is much more abrasion resistant than 3V and it can be hardened to a greater degree which should make it more resistant to deformation in chiseling. However, it is less tough. If it is tough enough it could be the optimum metal. Many knife makers think so. I think it is great that people are spending some effort to evaluate new metals and applaud your efforts. Keep us posted.

Re: Working with CPM M4...

#4

Re: Working with CPM M4...

TomD

I would have thought you could hack saw it. Is that for sure. Hack saws are like anything else, they come in different grades. Be sure it is a hss. I also use Eclipse type saws, they are so cheap they are basically throw aways and cut real well. Be sure to use some cutting oil, it will make most saws last longer.

One overlooked tool is the dremel. The tiny cut off discs are very effective. Particularly the glass re-inforced ones. They are slightly fragile, so eye prottection is all the more important. BUt they will cut hardened HSS bits like butter. They kick up a lot of dust for their size, so take the usual precautions, and I like to stand with my back to the breeze, I pick my moments.

Some of these materials will break if scored a little first.

I use a metal cutting bandsaw when I can. They can be picked up for 75 bucks and with a bi-metal blade will do a lot of work.

Remember that when you start down this path, you get to check the "yes" box when it come to whether you work metal pre-MRI. That entitles you to life affirming corneal x-rays every time you need an MRI. Which can be an issue if you need a lot of them.

Re: Working with CPM M4...

#5

working these metals

Bill Tindall

They all harden if they get hot while working them. I took the teeth right off a blade when I got too aggressive with 3V and it work hardened in the cut.

If you mill 3V without cooling shards of pointy blue steel come off the piece that are sharp like quills. Nasty chips!

Re: Working with CPM M4...

#6

Re: working these metals

TomD

That's why I use cutting oil or cuttin wax. The other extreme is friction sawing at wooden bandsaw speeds. Not sure how that would go down with a HSS. It gets it hot enough it just burns up so it should work. I bought a plasma cutter recently, but that is a bad idea for most uses because it will harden the stuff you next have to grind.