Re: Designing and Building an Entertainment Centre
Phil
Derek:
I will try to upload some more pics of the right side when I get a chance.
By definition, I will never need to replace that set: but if by chance it should need replacement, no problem. First off, the aspect ratio of any replacement set should be the same, so for a similar screen size, I would expect it would be a fairly close match. Any gaps could be filled in by additional trim set back from the front face frame. By the way, the top is removable: I've used dowels to position it on the base, but it lifts right off (there was no way I'd be able to get that snug a fit if the top were permanent). What's nice about this design is the least attractive portion of the set is hidden.
As far as ventilation, the back of the lower section where all the game consoles and components are is completely open: makes wiring easier and gives the heat somewhere to go. The top section has a back panel about one-third down from the top for rigidity, but I've never had a temp. issue with this configuration.
Right side houses game discs and cartridges, controls, cables in the bottom, and books/magazines on the top. No matter how much storage space I build, its seems to get filled up?
Regards,
Phil