New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Sharpening Stroke - Diamond Paste

Posts

Sharpening Stroke - Diamond Paste

#1

Sharpening Stroke - Diamond Paste

George Symula

I recently acquired an old cast iron table saw top and have begun sharpening using diamond paste. My question is pretty basic. How do you, those who use these plates sharpen, particularly bevels? Do you stroke back and forth (toward the edge and away from it)? Short strokes or long? I typically free hand with full bevels (no hollow) and a back and forth motion except for honing which is single strokes away from the edge. How much of a 11" X 3" surface do you use?

Re: Sharpening Stroke - Diamond Paste

#2

Re: Sharpening Stroke - Diamond Paste

Bill Tindall

I only pull because I am not coordinated enough to push and pull. I would be using all of a 3 x 12 plate. Bottom line-do what ever is comfortable