New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Back of French Footed Chest

Posts

Back of French Footed Chest

#1

Back of French Footed Chest

Bill Tindall


For all the planing and chiseling that goes on here there is little furniture posted. Maybe by posting the back of something someone will be encouraged to post the front of something else.

An exercise in excessive frugality:

Normally I would just ship lap boards for the back of a chest. The back is rabbited 1/2" to accept the boards. However.....

The last quartered poplar I had sawed for drawer stock was sawed a heavy 4/4 instead of the 6/4 requested. So, when I resaw this lumber for a 1/2" drawer side I am left with something about 1/4 to 3/8" thick. Well this thing has lots of drawers and there was lots of this thin stuff remaining. So I thought, in a burst of exceptional frugality, that I would make the back "frame and panel" and use this thin stuff for the panels. And, I had some 1/2" pieces left from the drawer making that was sufficient for the frame. The frame pieces are the size they are because that was the size of the 1/2" drawer remains. And I think a frame and panel back looks nice and I always wanted to try one. This chest is taking for ever to build so what's a bit more time. Took all day to make and fit all the parts and another part day to shellac it front and back. (I shellac all the interior parts in a chest of drawers. It leaves the poplar parts clean looking and they stay that way. ) I spent the rest of the day finding lumber for the top. No matter how much lumber one has there are never pieces perfect for the need.

BTW, I experimented with the "brush like mad" technique for shellac application with a Takalon brush. By golly it works great. Normally I would have just sprayed this assembly but the humidity was out of sight and shellac does not like to be sprayed at high humidity. I have had a continuous sheet of water condense on a panel during high humidity. Could not have been wetter if I had dipped it.

Re: Back of French Footed Chest

#2

Re: Back of French Footed Chest

Bill Houghton, Sebastopol, CA

Frame and panel backs are SO elegant. This is shaping up to be a lovely piece of work. I hope you'll put a label of some kind on it, in a discreet location, announcing the maker and year.

Re: Back of French Footed Chest

#3

marking

Bill Tindall

I embed a coin of appropriate year in the bottom of special pieces.