We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
I use Kremer Pigment's Liquid Fish Glue for lots of woodworking tasks, and it has always been predictable and it works well. Until now. About 3 weeks ago, I glued a fossil ivory tip to a violin bow blank with some of the product. All seemed fine until I recently noticed that the glue line has separated, and the glue appears runny - sort as if it absorbed humidity from the air. The RH in my shop is no more than 50%. Might this sort of thing happen if the product is old? This batch of glue is ~6+ years old and up till now, I've not seen any problems. The Kremer website says "shelf life 5 years" and on another .pdf document "shelf life is 1 year".
Obviously, my glue is too old. My question is : how old is "too old" when it comes to liquid fish and liquid hide glues? What are the gluing problems or symptoms one might see when the product is simply too old?
Thanks,
John - P.S. - I've bought new fish glue, so I'll be redoing the failed joint...
Just me maybe, but I try to never scrimp on glue or finishes. If it gets old (absolutely no later than the shelf life estimate) then I chuck and replace, no matter how much is left. Looking at the amount of work in the piece compared to the cost of new finish or glue, it is not worth any chances at all. I can mess things up well enough on my own without getting help from outdated material.
You can test to see if the glue is good by putting some on your index finger and thumb and touch them together repeatedly. It should form cottoning or legging, a kind of gossamer threads that indicate it is fresh. No threads no good.
You can increase the shelf life of hide glue by keeping it cold.