New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Hand woodworking publication

Posts

Hand woodworking publication

#1

Hand woodworking publication

ray

Are there any magazines available that have a primary focus on hand woodworking tools and techniques ?

Thanks

Re: Hand woodworking publication

#2

Re: Hand woodworking publication

David Weaver

There's some in a lot of the publications, but none that I'm aware of that are entirely hand tool woodworking from a technique perspective.

While the articles in magazines are sometimes interesting (and sometimes not), if your goal is to get concentrated material or have an organized reference, books are a lot better.

Just my opinion. I let my magazine subscriptions lapse and put the money toward books when I realized I get more practical use per dollar out of the books - especially if I can find them used.

Re: Hand woodworking publication

#3

Re: Hand woodworking publication

Bruce, a MN Galoot

The only one as far as I'm concerned would be Popular Woodworking. It has more, is better focused on our pursuits and is just a better mag than any other on the market. FWW throws us a token article now and again, but nothing like PWW. Even the power articles seem to be germane to hand tools (but then I'm a hybrid woodworker, myself, a neanderdabbler).

Having said that, if you can get the early Fine Woodworking mags, they're worth having. They come up on ebay periodically.

Re: Hand woodworking publication

#4

Moses Yoder

Re: Hand woodworking publication

Moses Yoder

As David says, the best value is used books. We have a very good used book store near us where I have found a number of very good references. In the 40's or 50's a number of books were written for school shop classes and they are good references for somebody just starting out. Another good way to learn is to buy a tool and use it.

Re: Hand woodworking publication

#5

David Barnett

Nowadays? Not so much. *LINK*

David Barnett

Nothing that I know of that covers only or even primarily handtools. PW's your best bet, as David Weaver suggested.

Traditional Woodworking (U.K.) was pretty good for hand tools when Jim Kingshott was their technical advisor, with lots of articles on projects where both hand tools and power tools were used together in a fairly even mix. I used to buy them when I could find them (used) but have since passed them along. To get an idea of what TW was about:

http://mirror.woodtools.nov.ru/mag/tww_2001_05/tww_2001_05.htm

http://mirror.woodtools.nov.ru/mag/tww_2001_09/tww_2001_09.htm

http://mirror.woodtools.nov.ru/mag/tww_2003_10/tww_2003_10.htm

http://mirror.woodtools.nov.ru/mag/tww_2004_07/tww_2004_07.htm

The Craftsman, Gustav Stickley's magazine, archived at the Digital Library for the Decorative Arts and Material Culture (U. of Wisconsin) may be helpful.


The Craftsman

Re: Hand woodworking publication

#6

Re: Hand woodworking publication

TD

Also, if your interest is in learning how to do stuff as opposed to reading endless discusions that are driven by a needed word count, or the need to produce some new insight, then I would watch video. These days there is a lot of useful stuff on youtube, though I don't know what is specifically available in this segment.

John Alexander's chair making video is an example of a tape that is quite rich, covers not only the topic in the title, but a lot of perriferal (geographically in his shop) stuff that is equally useful.

Franz Klausz's dovetailing video is also very good, though it does seem to function mostly to scare people off. In fact it is designed to be followed closely by beginers and really works as basic instruction if people will just put the shock of initial contact with his speed behing them. I've never made a drawer from start to in his 20 minutes, but I have used the techniques. Time spent with video and taken to the shop is more useful than reading an endless series of discussions about which part of a dovetail to cut first. Though these discussions can be entertaining.

Re: Hand woodworking publication

#7

Re: Hand woodworking publication

Pam Niedermayer - Austin, TX

I agree completely, as my woodworking video collection testifies. I think Kingshott's series of 4 videos is an excellent place to start, and finish.

Pam