New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Cast iron for diamond paste plate (again!)

Posts

Re: Cast iron for diamond paste plate (again!)

#2

What's the purpose of the bondo (car filler)?

Pam Niedermayer - Austin, TX

Re: Cast iron for diamond paste plate (again!)

#4

Leo Cuellar

Great Idea!!!

Leo Cuellar

Thank you yet again, Derek, for posting your projects. After trying to follow some of the rather tangled threads on this board, I've been strongly considering diamonds for sharpening. I hadn't even considered broken planes as a source of cast iron for this. What a great idea!

Re: Cast iron for diamond paste plate (again!)

#5

Have you tried Fixall or Plaster of Paris? *LINK*

Bill Houghton, Sebastopol, CA

Might be even easier.

I don't know if they sell Fixall outside the U.S., but there are surely equivalent products. Link is to the company's website.


http://www.custombuildingproducts.com/ProductCatalog/SurfacePrep/repair/fixitall.aspx?user=arc&lang=en

Re: Cast iron for diamond paste plate (again!)

#6

Re: To secure the cast iron....

TD

What do you find easier about it? Pre-mixed? Epoxy and wood are a marriage made in heaven. And for any comparable application you could use a lot less epoxy. Now that our dollar store is selling those cheezy double barrel syringes even the small jobs are easy. Bondo isn't even an adhesive.

Re: Cast iron for diamond paste plate (again!)

#7

Re: Great Idea!!!

TD

"I hadn't even considered broken planes as a source of cast iron for this. What a great idea!"

You're welcome! :)

Re: Cast iron for diamond paste plate (again!)

#8

Re: Great Idea!!!

Derek Cohen (in Perth, Australia)

Absolutey Tom!

This may have been your idea and I picked it up from a previous post - very likely. I know that it is as much your inspiration as mine. I did point this out in the article.

Regards from Perth

Derek

Re: Cast iron for diamond paste plate (again!)

#10

Moses Yoder

Re:4-1/2 for plate?

Moses Yoder

I got a really nice #4-1/2 Saturday morning. It's in great shape with no rust and nice wood with no cracks, only slight discoloration on the iron. I was going to resell it, but now I'm wondering, since I only paid $20 for it maybe I will use it for a sharpening plate.

Re: Cast iron for diamond paste plate (again!)

#11

Re: To secure the cast iron....

Derek Cohen (in Perth, Australia)

Why Bondo (in Oz car body filler is often referred to as Bog)?

Firstly, I have plenty left over from car restorations over the years (used to smooth over the panels after metal bumping).

Secondly, bondo is nothing more than polyester resin. It makes as good a glue as epoxy resin (but epoxy is waterproof and has a little more flex).

Thirdly, the bondo mixes to a thick paste, which stays put ... not runny. The alternative is epoxy plus micro balloon (or talc), which is essentially what Bondo is.

Regards from Perth

Derek

Re: Cast iron for diamond paste plate (again!)

#12

Leo Cuellar

Thanks for setting me straight.

Leo Cuellar

David. You always seem to have the lowdown.

Re: Cast iron for diamond paste plate (again!)

#13

I know you`re kidding

Bob Hackett

But just in case you`re not I`ll trade you 3 ready made plates for it. You call the size(within reason).

Re: Cast iron for diamond paste plate (again!)

#14

Re: Thanks for setting me straight.

TD

Well I doubt that is any more exclusive than my woodcentral rights, (which I am still asserting, :), just more searchable.