New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Best finish for wooden screws?...

Posts

Re: Best finish for wooden screws?...

#26

Sitting at the feet of people here...

Bill Houghton, Sebastopol, CA

Never having done ANY gem cutting...or, well, any number of things that people here casually mention...I feel like such a novice at hand crafts.

Oh, well. It's all a matter of perspective. I bet there are lots of folks here who've never dropped an air-cooled VW motor, replaced the clutch, and reinstalled the motor, all in half an hour.

Re: Best finish for wooden screws?...

#27

David Barnett

Yabut, if you really wanted to...

David Barnett

...you could learn to cut a gem in a couple hours. To do what you did to that VW, however, you'd have to think VW, or at least think cars, and that's not something you pick up in an hour or so. And even though I can think 'puter, these days I get my friend to keep mine going. I have a great deal of respect for certain tradesmen I've known. It's that 10,000 hour thing. Color me 1,000 hours or more in a bunch of stuff, but only the double digits in one or two lifelong endeavors.

Re: Best finish for wooden screws?...

#28

If you have a head for symmetry...

John in NM

There's really nothing to cutting rocks, aside from 3D pattern recognition it really comes down to learning to polish the stuff. Some like Beryls and Tourmalines are fantastically easy, but the cheapest material around, quartz, can be amazingly difficult.

I know a lawyer who considers his job fun, and consequently he's very good at it. But that stuff makes my head swim, probably because it's such a chore to keep all the details straight, so I could never do what he does. To each their own :D

Re: Best finish for wooden screws?...

#29

For some strange, strange reason...

John in NM

I actually attempted to relate the evolution of this thread to my wife.... :D

She did point out that if bear fat were kind of odiferous, one might not want to use it for boot dressing if you planned to walk in bear country :D

Re: Best finish for wooden screws?...

#30

Oh, I don't know

Bill Houghton, Sebastopol, CA

they might greet you as a long lost friend...right up to the moment that they realize that you're not old Ed after all, just someone whose boots smell like him.

Re: Best finish for wooden screws?...

#31

But what if...

John in NM

Your boots don't smell like Ed, but rather Phyllis, Ed's long lost "amor"? :D

Re: Best finish for wooden screws?...

#32

then it's time to practice your marathon skills

Bill Houghton, Sebastopol, CA

Re: Best finish for wooden screws?...

#33

All I asked was for the best finish +...

John Aniano in central NJ...

And I got replies about croissants, bear fat, German grammar, standing people, gem cutting, truffle oil, smelly boots and pigs!

Anyway, thanks for all the useful responses. Including the bear fat suggestion from Stephen.

Stephen, you said "... Linseed oil is not the best, unless the wood is very dry and needs consolidation...". In fact, I do have two antique, nearly perfect ~2.5" diameter wooden vise screws and nuts that must be 100+ years old. Never used as far as I can tell, and I've been hoarding them for my own Roubo bench project (coming very soon). As I said, the vise screws are old and although the teeth appear sound and the nuts run smoothly, would the application of some wax PLUS linseed oil make the teeth somewhat harder or consolidate them as you suggested? What specifically did you mean by "consolidate"?

John

Re: Best finish for wooden screws?...

#34

Stephen Shepherd

Re: All I asked was for the best finish +...

Stephen Shepherd

John,

You did get more than your question answered!

The old wood will benefit from an application of linseed oil, I would suggest 50/50 with turpentine, apply, wipe off any excess then allow to dry for 24 hours depending on temperature and humidity. This will go into the wood and harden there by consolidating the wood fibers. Apply the beeswax after the oil/turps mix has dried as wax is a huge sticky molecule that will not penetrate the wood.

I hope we finally got around to your original question.

Stephen

Re: Best finish for wooden screws?...

#35

Ellis Walentine

VW tales

Ellis Walentine

Bill, your post reminded me of a young woodworker who worked for me back in the 80s. (I'll spare you the reason we called him Lucky.) Anyhow, Lucky was a bug nut and he had a few parts cars parked around my property. The one he drove had oak running boards with inlaid stained glass floral designs. He could drop the motor, do a ring job on it and have it running again, all on his lunch hour. The funniest story, though, was the time he got fed up with the substandard heater in his bug, so he installed a gas-powered heater in the trunk, exhausting into the front wheel well. When he cranked it up, the blast of heat would melt the tips of his shoelaces.

Another old pal from those days (late 70's), who is a pretty well-known woodturner, also owned a bug. He had spent some time in Nepal and wore a traditional woolen kaftan in the winter. To stay warm in his car, he hung a clay pot with hot coals covered by moss or something from a rope lanyard under his kaftan. No end of amusement there either.

Thanks for the memories.

Ellis

Re: Best finish for wooden screws?...

#36

Or bring a slow friend

Neal in San Jose

that doesn't owe you any money.

Re: Best finish for wooden screws?...

#37

Check with "Davy" on the Bar grease

WAYNE CARSON