New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

55 degree frog for LN #4

Posts

55 degree frog for LN #4

#1

55 degree frog for LN #4

les winter

Lie-Nielsen is now making 55-degree frogs for their #4 smoother. Previously, you could only get a 55 for the 4 1/2 and 5 1/2 sizes.

It's not on the website just yet, but I emailed them today asking if they were ever going to produce one, and, it's my lucky day, their first batch is now in stock.

Re: 55 degree frog for LN #4

#2

Moses Yoder

Re: 55 degree frog for LN #4

Moses Yoder

If you have both frogs it seems like you could mate them and have tad poles. You could start a frog business; I hear people buy them as pets all the time, or use them as snake food. It would be interesting to see whether the 45 or 55 gene is dominant.

It's kind of interesting to me that James Krenov in "The Fine Art of Cabinetmaking" I think states that he tried various angles then returned to 45�. He planed some pretty difficult woods too. My cousin Jed Clampett wonders if putting some duct tape on a 45� frog would work.

Re: 55 degree frog for LN #4

#3

Actually Moses...

Scott Burr in Ben Lomond CA

Jim Kingshott recommended putting "packing" under the back of the frog to increase the angle.

Re: 55 degree frog for LN #4

#4

Re: Actually Moses...

Derek Cohen (in Perth, Australia)

I did this many years ago, very successfully too I might add (and I did not know that JK had suggested it .. interesting).

For shims I used steel washers that were cut in half (to fit against in the space). The end result was very rigid and there was no chatter.

This process also allows one to use a thicker blade, and/or you need to close the mouth as the higher frog angle will open it up.

This may be one situation where the common garden Bailey is "better" than a Bed Rock.

Regards from Perth

Derek