New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

The Veritas SemiFill Smoother - early review

Posts

The Veritas SemiFill Smoother - early review

#1

The Veritas SemiFill Smoother - early review

Derek Cohen (in Perth, Australia)

�SemiFill� is an abbreviation of Semi Infill. In response to repeated requests for an infill smoother, the SemiFill serves to build on an existing platform, the Bevel Up Smoother (#164 �).


Article here: http://www.inthewoodshop.com/ToolReviews/VeritasSemiFillSmoother.html

Regards from Perth

Derek

Re: The Veritas SemiFill Smoother - early review

#2

Re: The Veritas SemiFill Smoother - early review

Phil Smith

Are you going to fit the plane with the new C3PO 2BRNT2B plane iron with the Mac Alister tartan up to see if the extra mass improves performance. This could be an exciting development.

Re: The Veritas SemiFill Smoother - early review

#3

Re: The Veritas SemiFill Smoother - early review

anotherBob

DDN

(date duly noted)

:)

Re: The Veritas SemiFill Smoother - early review

#4

Re: The Veritas SemiFill Smoother - early review

Roger Nixon

No kidding, Derek, it looks like it would work. Does it really?

Re: The Veritas SemiFill Smoother - early review

#5

Re: The Veritas SemiFill Smoother - early review

Derek Cohen (in Perth, Australia)

Hi Roger

Does it make shavings? Yep. Is it any good at doing so? Nope. Actually, it is difficult to say - the infill needs to be glued in, or secured in some way. As it is, it has sandpaper underneath to act as non-slip, but this is not fully adequate. As a result the blade slips a little and it is not possible to obtain a stable depth of cut.

On the other hand I have built a plane like this. It does have a 25 degree bed ... and it is one of the finest smoothers I have used.


So it is more than just possible. :)

Regards from Perth

Derek

Re: The Veritas SemiFill Smoother - early review

#6

Re: The Veritas SemiFill Smoother - early review

bugbear

But can it take the "thick blade" ?

BugBear

Re: The Veritas SemiFill Smoother - early review

#7

Re: The Veritas SemiFill Smoother - early review

Derek Cohen (in Perth, Australia)

Hi BB

It can ... but the combination is so tall that you cannot see where you are going.

Until next April 1 ...

Regards from Perth

Derek