The latest Veritas blockbuster! (long) *LINK*
Bill Houghton, Sebastopol, CA
Three years ago, we brought you the first pictures of the Lee Valley large plow plane (linked below). The large plow is rumored to be a year or two from production.
Now, the same clever spy who risked her life � well, at least her shopping privileges at Lee Valley, which is nearly the same thing � to bring you those pictures is fresh off probation for the trespassing charges and back with new pictures*.
Consider: most people are right-handed, and about 13% of the population is left-handed. Lee Valley has been a leader in offering tools in both right- and left-handed versions. But there is a small, yet important group whose needs are not being met: those who can work equally well with either hand, a trait known as ambidexterity. Using both left and right handed models of tools somewhat serves that need, but it�s awkward and expensive. We are thus thrilled to show you pictures of proposed designs for the Veritas Ambidextrous Skew Rabbeting Block Plane. This plane was selected for this pioneering work partly because it�s small, and prototyping is easier; and partly because nothing thrills an engineer quite like a long, complex project name.
The first design being studied is simple in concept, but difficult in execution.

The stumbling block for this design was machining the blade, which must be ground at two different angles, with an accurate arris between the two halves. The engineers brought this problem to Rob Lee�s attention early, and got the go-ahead to proceed (quote from Rob: �Hot dang, we can buy another machine!�). Lee Valley has selected a surface grinder from Niedersachsisches Holzhobelwerke - Janus GmbH. This company, founded by Italian immigrants to Bavaria, started out building food processing machinery but now specializes in tough machining problems (company motto: �After pasta, everything else is easy!�).
This design, though, has one major flaw; these days, everyone expects rabbeting planes to have fences. The group attempted a design with a fence, but it limits the width of stock that can be worked.

Meanwhile, the Stanley No. 79 side rabbet plane has inspired a subgroup to work on a completely different design.

The double-ended plane, although it resolves the fence problem and simplifies machining of the blade and blade bed, presents new problems, such as how to incorporate LV�s traditional adjuster. Several designs have been proposed, replete with bevel gears, friction drives, push/pull knobs reminiscent of the gearshift on a Citroen 2CV, and of course lots of wavy washers and setscrews, but they�re all rather complex. In addition, this design cramps space for the lever cap, a problem not yet entirely resolved.
When can we expect this fabulous product to hit the streets? Well, we can be sure it won�t be April 1st. Lee Valley would never introduce a product on April Fool�s Day; people wouldn�t believe it was for real.
*Our spy recently replaced her 4x5 view camera with a digital camera and, like all converts to a new technology, has gone a bit overboard. We had to pare down 10,631 pictures to the best three.
----------------
Many thanks to Derek Cohen for photoshopping the pictures, and Jesper Gr�nvaldt for coming up with a proper company name for the Janus operation.
About the large plow plane



