New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Yankee 35 Screwdriver

Posts

Yankee 35 Screwdriver

#1

Yankee 35 Screwdriver

Doug Reynolds in Seattle

I just took posession of a North Brothers "Yankee" #35 screwdriver. This is my first and I believe it is supposed to have a "spring action" which, mine does not. So, I am left with pulling the blade portion out after every downward stroke. Does any one have a trouble shooting guide or instructions on what to do to fix this? TIA, Doug

Re: Yankee 35 Screwdriver

#2

Not a direct response *LINK*

Bill Houghton, Sebastopol, CA

Stanley still lists parts for some of the Yankee drivers, linky at the bottom there. You might contact Lori Goucher, who is, as far as I know, still their hand tool parts specialist. Last contact information I had for her was 800-262-2161 ex 55839; e-mail possibly lgoucher@stanleyworks.com.

Googling "Yankee screwdriver instruction" brought some possibly useful links, of which this was one of the first listed: http://www.instructables.com/id/Yankee-Screwdriver-Maintenance/. No idea how useful it is, but the author seems to have put some energy into it.


http://www.stanleytoolparts.com/yankeeratcheting.html

Re: Yankee 35 Screwdriver

#3

Re: Yankee 35 Screwdriver

Jim Crammond in Monroe, Mi.

Doug,

In the Yankee numbering scheme, the 30, 31 and 35 did not have a return spring. The models with the return spring were 130, 131, and 135. Don't feel too bad though, their models without the spring have less of a tendency to mar what you are working on because it causes you to use two hands.

Jim

Re: Yankee 35 Screwdriver

#4

True

Bill Houghton, Sebastopol, CA

I dented the paint job on my current project today by failing to forget to aim the screwdriver away from the wall before releasing the collar that keeps the screwdriver "shut."

I wind up using both hands anyway; but the spring does help in moving the screw into place.