New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Woodcraft Week at the Woodwright's School

Posts

Woodcraft Week at the Woodwright's School

#1

Woodcraft Week at the Woodwright's School

Steve Lillie

I've been reading WoodCentral for many years, but (almost) never contributed. I am motivated to do so by my experience last week -- the first "Woodcraft Week" put on by Roy Underhill and friends at McBane Mill, Roy's home and outdoor classroom west of Chapel Hill, NC. My advice would be -- if you get the chance, jump at it! I've done a great variety of power and handtool woodworking over many years, watched all the shows, and read a lot of great books, but never done anything quite like this. During the week we tromped around Roy's woods, cut down trees, sawed them to length, dragged them out of the woods, hewed them, sawed them on a pit saw that we helped frame up, made shaving horses, and much more. One day we even worked with Peter Ross at a portable forge he set up, making our own pinch dogs. You can see lots of photos at www.pbase.com/woodwright/woodcraft_week.

The most fun and valuable part of the week was the extensive interaction with Roy and Elia Bizzarri, Bill Anderson, and Jerome Bias, who were with us all week. They are all very knowledgeable in various aspects of the craft -- each a master in his own wright (sorry, couldn't resist.) We went from 9 in the morning to after 6 pm each day, and the time flew by. I'd be happy to try to answer any questions.

Re: Woodcraft Week at the Woodwright's School

#2

Re: Woodcraft Week at the Woodwright's School

Patrick Gibbons

When's the next one and how much does it cost. You suck by the way. I'm jealous.

Re: Woodcraft Week at the Woodwright's School

#3

Moses Yoder

Re: Woodcraft Week at the Woodwright's School

Moses Yoder

I'd kind of like to know what Roy's take is on CPM 3V steel, if you could answer that question.

Re: Woodcraft Week at the Woodwright's School

#4

That really sounds like fun

roninkokomo

Re: Woodcraft Week at the Woodwright's School

#5

Re: Woodcraft Week at the Woodwright's School

Steve Lillie

There's a class in May, one in September -- about $650, plus you need a place to stay -- local B&Bs are about $70 per day and up, some hotels are a little cheaper. The school also has a bunch of more conventional woodworking classes in a storefront in Pittsboro, 15 miles down the road, but I haven't really looked into those.

An obvious problem with having done this is resisting the urge to say, now and then, "Well, ROY says you do it this way...."

Re: Woodcraft Week at the Woodwright's School

#6

Re: Woodcraft Week at the Woodwright's School

Steve Lillie

Uhhh, somehow it didn't come up. The one steel related issue came up when I asked Peter Ross how hot the steel was when he pulled it from the forge and started hammering. His reply -- "Hot enough."

Re: Woodcraft Week at the Woodwright's School

#7

This exchange really did sound Delphic. 

Pam Niedermayer - Austin, TX

Re: Woodcraft Week at the Woodwright's School

#8

Re: This exchange really did sound Delphic.

Steve Lillie

Roy and Peter got an interesting view of the vacationing public in their years at Williamsburg. One of their favorite questions from a visitor was "So, are those your shoes, or do you work here?" I'm not sure of the right answer to that one!

Of course, having struggled to find the right question to ask a craftsperson at a show, I think I sympathize with the tourists.

Re: Woodcraft Week at the Woodwright's School

#9

Re: This exchange really did sound Delphic.

Pam Niedermayer - Austin, TX

Yeah, understood; but there are always craft things to ask, even the history of the craft. And then, there's always silence. :) I enjoyed my last visit to Williamsburg, piles of woodworking stuff happening.

Pam

Re: Woodcraft Week at the Woodwright's School

#10

Re: This exchange really did sound Delphic.

TomD

My wife used to work at one such place. They had a list of stupid questions (yes there are stupid questions). Nothing too remarkable, included such as "is that fire real?" "Is that cat real?". But I guess in a sense those are the people that make your day.

Re: Woodcraft Week at the Woodwright's School

#11

Re: That really sounds like fun

John Dilsaver

Hi Steve, and all. I was at the Woodcraft week and recommend it highly. I had never pit sawn before, the spring pole lathe was new to me, liked it a lot. I've split wood with a froe before, but hadn't used a riving break. Also, boring machines, what fun! I had a blast boring holes with different boring machines. This fun week has already gotten me into the shop more, making more chips, but using less electricity.

Re: Woodcraft Week at the Woodwright's School

#12

Jack Guzman from Maine

Riving brake

Jack Guzman from Maine

I just read your post and when I saw the term "riving brake" I googled it. This is another slap myself on the forehead saying "why didn't I think of that?"moment. So simple, but it never occured to me.I've been struggling with these oak splits by standing on one end trying to get them split all the way while prying up on the froe handle. Everything just moves the wrong way. Why have I never heard of this thing before? Michael Dunbar's book has pictures of him using the froe while the piece is held partially by a metal vise.---Jack