We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
Just got my copy of Popular Woodworking mag, and read your article on Japanese hand planes. Great job! Well written and informative article. You and your co-author explained the difference and similarities between Eastern and Western handplanes in a way that makes sense to a neophyte like me. Thank you very much!
Thanks, Stuart! I could not have done this article without Bob Rozaieski, and it was a lot of fun to write.
When we found the coincidence between Japanese and western planes, it seemed more than a little like a Da Vinci Code conspiracy. I think that it's completely fascinating.
Thanks. Got 20 seconds to scan the article at the checkout today. Some stuff I look for ward to catching up with. Biggest surprise was the idea that a trying plane has only two contact points at both ends, and the blade is above these points. Everything I have previously seen says 3 to 4 contact points. I look for ward to reading the text. I have always said that inline points lead to concave longi boards if you use the plane's inherent characteristics. A concave plane is therefore required for straight edges, ATMO.
I hope people will keep in mind that these two traditions have a lot more in common that otherwise.